Jump to ContentJump to Main Navigation
Show Summary Details

Chemical Papers


IMPACT FACTOR 2015: 1.326

SCImago Journal Rank (SJR) 2015: 0.382
Source Normalized Impact per Paper (SNIP) 2015: 0.560
Impact per Publication (IPP) 2015: 1.279

Online
ISSN
1336-9075
See all formats and pricing



Select Volume and Issue

Issues

Polypyrrole coating of inorganic and organic materials by chemical oxidative polymerisation

1Polymer Institute, Slovak Academy of Sciences, Dúbravská cesta 9, 845 41, Bratislava, Slovakia

Citation Information: Chemical Papers. Volume 66, Issue 5, Pages 392–414, ISSN (Online) 1336-9075, DOI: https://doi.org/10.2478/s11696-011-0120-4, April 2012

Publication History

Published Online:
2012-04-05

Abstract

Polypyrrole is one of the most frequently studied conducting polymers, having high electrical conductivity and stability, suitable for multi-functionalised applications. Coatings of chemically synthesised polypyrrole applied onto various organic and inorganic materials, such as polymer particles and films, nanoparticles of metal oxides, clay minerals, and carbon nanotubes are reviewed in this paper. Its primary subject is the formation of new materials and their application in which chemical oxidative polymerisation of pyrrole was used. These combined materials are used in antistatic applications, such as anti-corrosion coating, radiation-shielding, but also as new categories of sensors, batteries, and components for organic electronics are created by coating substrates with conducting polymer layers or imprinting technologies.

Keywords: conducting polymers; polypyrrole; coating; polymer composites; carbon nanotubes

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
Patrycja Bober, Beata A. Zasonska, Petr Humpolíček, Zdenka Kuceková, Martin Varga, Daniel Horák, Vladimir Babayan, Natalia Kazantseva, Jan Prokeš, and Jaroslav Stejskal
Synthetic Metals, 2016, Volume 214, Page 23
[2]
P. M. Kharade, S. M. Mane, S. B. Kulkarni, P. B. Joshi, and D. J. Salunkhe
Journal of Materials Science: Materials in Electronics, 2015
[3]
A. Rudajevová, M. Varga, J. Prokeš, J. Kopecká, and J. Stejskal
Acta Physica Polonica A, 2015, Volume 128, Number 4, Page 730
[4]
Subhankar Maity and Arobindo Chatterjee
Journal of Composites, 2015, Volume 2015, Page 1
[5]
Jana Tabačiarová, Matej Mičušík, Pavol Fedorko, and Mária Omastová
Polymer Degradation and Stability, 2015
[6]
Sabine Akerboom, Sidharam P. Pujari, Ayse Turak, and Marleen Kamperman
ACS Applied Materials & Interfaces, 2015, Page 150727105207001
[7]
Elizaveta Alekseeva, Patrycja Bober, Miroslava Trchová, Ivana Šeděnková, Jan Prokeš, and Jaroslav Stejskal
Synthetic Metals, 2015, Volume 209, Page 105
[8]
Alvaro Garcia-Cruz, Michael Lee, Nadia Zine, Monique Sigaud, Joan Bausells, and Abdelhamid Errachid
Sensors and Actuators B: Chemical, 2015
[9]
Piotr Gryczan, Anna Kisiel, Agata Michalska, and Krzysztof Maksymiuk
Electroanalysis, 2015, Volume 27, Number 3, Page 752
[10]
Z. Stempien, T. Rybicki, E. Rybicki, M. Kozanecki, and M.I. Szynkowska
Synthetic Metals, 2015, Volume 202, Page 49
[11]
Jürgen Pionteck, Elixana Maria Melchor Valdez, Francesco Piana, Mária Omastová, Adriaan Stephanus Luyt, and Brigitte Voit
Journal of Applied Polymer Science, 2015, Volume 132, Number 20, Page n/a
[12]
Khouloud Jlassi, Ahmed Mekki, Mémia Benna-Zayani, Ajay Singh, Dinesh K. Aswal, and Mohamed M. Chehimi
RSC Adv., 2014, Volume 4, Number 110, Page 65213
[13]
Yongshun Huang, Jiaxing Li, Xiaoping Chen, and Xiangke Wang
RSC Adv., 2014, Volume 4, Number 107, Page 62160
[14]
[15]
Lian Tang, Jinlu Han, Zhenlin Jiang, Shiyan Chen, and Huaping Wang
Carbohydrate Polymers, 2015, Volume 117, Page 230
[16]
Urvashi Malhotra, Subhankar Maity, and Arobindo Chatterjee
Journal of Applied Polymer Science, 2015, Volume 132, Number 4, Page n/a
[17]
Alena Reznickova, Zdenka Novotna, Zdenka Kolska, and Vaclav Svorcik
Nanoscale Research Letters, 2014, Volume 9, Number 1, Page 305
[18]
A. Reznickova, Z. Kolska, K. Zaruba, and V. Svorcik
Materials Chemistry and Physics, 2014, Volume 145, Number 3, Page 484
[19]
Mohammad G. H. Zaidi, Aparna Thakur, Tithi Agarwal, and Sarfaraz Alam
Iranian Polymer Journal, 2014, Volume 23, Number 5, Page 365
[20]
Mária Omastová, Matej Mičušík, Pavol Fedorko, Jürgen Pionteck, Jana Kovářová, and Mohamed M. Chehimi
Surface and Interface Analysis, 2014, Volume 46, Number 10-11, Page 940
[21]
Mohammad Kashif, Nazir Ahmad, and Sharif Ahmad
Journal of Solid State Electrochemistry, 2014, Volume 18, Number 7, Page 1855
[22]
Mikko Salomäki, Ossi Myllymäki, Minna Hätönen, Juho Savolainen, and Jukka Lukkari
ACS Applied Materials & Interfaces, 2014, Volume 6, Number 4, Page 2325
[23]
N. V. Blinova and F. Svec
J. Mater. Chem. A, 2014, Volume 2, Number 3, Page 600
[24]
Ahmed Mekki, Nirav Joshi, Ajay Singh, Zakaria Salmi, Purushottam Jha, Philippe Decorse, Stéphanie Lau-Truong, Rachid Mahmoud, Mohamed M. Chehimi, Dinesh K. Aswal, and Shiv K. Gupta
Organic Electronics, 2014, Volume 15, Number 1, Page 71
[25]
Zakaria Salmi, Aazdine Lamouri, Philippe Decorse, Mohamed Jouini, Amine Boussadi, Jocelyn Achard, Alix Gicquel, Samia Mahouche-Chergui, Benjamin Carbonnier, and Mohamed M. Chehimi
Diamond and Related Materials, 2013, Volume 40, Page 60
[26]
Tohru Nishinaga, Takuya Kageyama, Masahide Koizumi, Kyoko Ando, Masayoshi Takase, and Masahiko Iyoda
The Journal of Organic Chemistry, 2013, Volume 78, Number 18, Page 9205
[27]
Hamid Reza Heydarnezhad and Behzad Pourabbas
Journal of Materials Science: Materials in Electronics, 2013, Volume 24, Number 11, Page 4378
[28]
Ajay Singh, Zakaria Salmi, Purushottam Jha, Nirav Joshi, Ashwini Kumar, Philippe Decorse, Hélène Lecoq, Stephanie Lau-Truong, Dinesh K. Aswal, Shiv K. Gupta, and Mohamed M. Chehimi
RSC Advances, 2013, Volume 3, Number 32, Page 13329
[29]
Samia Mahouche-Chergui, Mohamed Guerrouache, Benjamin Carbonnier, and Mohamed M. Chehimi
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2013, Volume 439, Page 43
[30]
Ajay Singh, Zakaria Salmi, Nirav Joshi, Purushottam Jha, Ashwini Kumar, Hélène Lecoq, Stephanie Lau, Mohamed M. Chehimi, Dinesh K. Aswal, and Shiv K. Gupta
RSC Advances, 2013, Volume 3, Number 16, Page 5506
[31]
Jing Feng, Xinli Jing, and Yu Li
Chemical Papers, 2013, Volume 67, Number 8
[32]
Brendan T. Parr, Samantha A. Green, and Huw M. L. Davies
Journal of the American Chemical Society, 2013, Volume 135, Number 12, Page 4716
[33]
Mehrdad Gholami, Abdol-Majid Ghasemi, Mohammad Loghavi, Shima Behkami, and Amaneh Ahamdi-Dokht-Faraghe
Chemical Papers, 2013, Volume 67, Number 8
[34]
Ali Olad, Azam Rashidzadeh, and Maryam Amini
Advances in Polymer Technology, 2013, Volume 32, Number 2, Page n/a
[35]
Katarína Mosnáčková, Mohamed Chehimi, Pavol Fedorko, and Mária Omastová
Chemical Papers, 2013, Volume 67, Number 8
[36]
Milena Špírková, Patrycja Bober, Jiří Kotek, and Jaroslav Stejskal
Chemical Papers, 2013, Volume 67, Number 8
[37]
Mohamed F. Attia, Tahar Azib, Zakaria Salmi, Ajay Singh, Philippe Decorse, Nicolas Battaglini, Hélène Lecoq, Mária Omastová, Asha A. Higazy, Amira M. Elshafei, Mohamed M. Hashem, and Mohamed M. Chehimi
Journal of Colloid and Interface Science, 2013, Volume 393, Page 130
[38]
Seyfullah Madakbaş, Emrah Çakmakçı, Memet Kahraman, and Kadir Esmer
Chemical Papers, 2013, Volume 67, Number 8

Comments (0)

Please log in or register to comment.