Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Electrical, Control and Communication Engineering

The Journal of Riga Technical University

2 Issues per year

Open Access
Online
ISSN
2255-9159
See all formats and pricing
More options …

Conducted EMI of Switching Frequency Modulated Boost Converter

Deniss Stepins
Published Online: 2013-09-05 | DOI: https://doi.org/10.2478/ecce-2013-0009

Abstract

In this paper conducted electromagnetic interference (EMI) of boost converter with switching frequency modulation (SFM) is theoretically analyzed in details. In the analysis line impedance stabilization network parameters, power inductor and input filtering capacitor parameters are taken into account. The analysis shows that the conducted EMI attenuation due to the use of SFM depends not only on modulation index as it is assumed in numerous research papers, but also on central switching frequency. Useful expressions to numerically calculate SFM boost converter conducted EMI spectrum and attenuation due to the use of triangular and sawtooth modulation waveforms are derived. Additionally experimental verification of the theoretical results is performed using a superheterodyne spectrum analyzer. Moreover a procedure for the choice of optimum SFM parameters (modulation waveform, frequency deviation and modulation frequency) to get maximum conducted EMI attenuation is proposed.

Keywords: Electromagnetic interference; switched-mode power supply; frequency modulation

  • [1] C. R. Paul, Introduction to Electromagnetic Compatibility. New Jersey: John Wiley & Sons, 2nd ed., 2006, pp. 49-90.Google Scholar

  • [2] F. Zare, “EMI issues in modern power electronic systems,” IEEE EMCSociety Newsletter, No.221, pp.66-70, 2009.Google Scholar

  • [3] K. Mainali, R. Oruganti, “Conducted EMI Mitigation Techniques for Switch-Mode Power Converters: A Survey,” IEEE Transactions onPower Electronics, vol. 25, no. 9, pp. 2344-2356, 2010.Google Scholar

  • [4] G. M. Dousoky, M. Shoyama, T. Ninomiya, "Double-hybrid spreadspectrum technique for conducted-EMI reduction in DC-DC switching regulators with FPGA-based controller," IEEE TelecommunicationsEnergy Conference, 2009 (INTELEC 2009), pp. 1-6.Google Scholar

  • [5] S. Johnson and R. Zane, “Custom spectral shaping for EMI reduction in high-frequency inverters and ballasts,” IEEE Transactions on PowerElectronics, vol. 20, no.6, pp. 1499 - 1505, Nov. 2005.Google Scholar

  • [6] D. Gonzalez, J. Balcells, A. Santolaria, J. Bunetel, J. Gago, D. Magnon, S. Brehaut, “Conducted EMI Reduction in Power Converters by Means of Periodic Switching Frequency Modulation,” IEEE Transactions onPower Electronics, vol.22, no.6, pp. 2271-2281, 2007.Google Scholar

  • [7] K. Tse, H. Chung, S. Hui, H. So, “Comparative Study of Carrier- Frequency Modulation Techniques for Conducted EMI Suppression in PWM Converters,” IEEE Transactions on Industrial Electronics, vol. 49, no.3. pp. 618-627, 2002.Google Scholar

  • [8] J. Balcells, A. Santolaria, A. Orlandi, D. Gonzalez, and J. Gago, “EMI reduction in switched power converters using frequency modulation techniques,” IEEE Trans. Electromagn. Compat., vol. 47, no. 3, pp. 569-576, Aug. 2005.Google Scholar

  • [9] Santolaria A., SSCG methods of EMI emissions reduction applied to switching power converters // Ph.D. dissertation, Electron. Eng. Dept., Polytechnic University of Catalonia, Barcelona, Spain, Jul. 2004.Google Scholar

  • [10] F. Lin and D. Y. Chen, “Reduction of power supply EMI emission by switching frequency modulation,” IEEE Trans. Power Electron., vol. 9, no. 1, pp. 132-137, Jan. 1994.Google Scholar

  • [11] K.B. Hardin, J.T. Fessler, D.R. Bush, “Spread Spectrum Clock Generation for the Reduction of Radiated Emissions,” Proceedings ofIEEE International Symposium on Electromagnetic Compatibility, August 1994, pp. 227-231.Google Scholar

  • [12] P. Musznicki, JL. Schanen, P. Granjon, P.J. Chrzan, “Better understanding EMI generation of power converters,” Proceedings ofIEEE Power Electronics Specialists Conference (PESC2005), Recife, Brazil, June 2005, pp. 1052-1056.Google Scholar

  • [13] F. Giezendanner, J. Biela, J. W. Kolar, S. Zudrell-Koch, “EMI noise prediction for electronic ballasts,” IEEE Transactions on PowerElectronics, vol. 25, no. 8, pp. 2133-2141.Google Scholar

  • [14] S. Wang, F.C. Lee, W.G. Odendaal “Improving the performance of boost PFC EMI filters,” Proceedings of IEEE Applied PowerElectronics Conference and Exposition (APEC 2003), Feb. 2003, pp. 368-374.Google Scholar

  • [15] L. Yang, B. Lu, W. Dong, Z. Lu, M. Xu, F.C. Lee, W.G. Odendaal “Modelling and characterization of a 1 KW CCM PFC converter for conducted EMI prediction,” Proceedings of IEEE Applied PowerElectronics Conf. and Exposition (APEC 2004), 2004, pp. 763-769.Google Scholar

  • [16] K. Mainali, R. Oruganti, “Simple analytical models to predict conducted EMI noise in a power electronic converter,” Proceedings of the 33rdAnnual Conference of the IEEE Industrial Electronics Society(IECON2007), 2007, pp. 1930-1936.Google Scholar

  • [17] K. Kostov, J.-P. Sjöroos, J. Kyyrä, and T. Suntio “Selection of Power Filters for Switched Mode Power Supplies,” Proceedings of NordicWorkshop on Power and Industrial Electronics (NORPIE 2004), Trondheim, Norway, June 2004, pp. 1-7.Google Scholar

  • [18] L. Barragan, D. Navarro, J. Acero, I. Urriza, and J-M. Burdío, “FPGA Implementation of a Switching Frequency Modulation Circuit for EMI Reduction in Resonant Inverters for Induction Heating Appliances,” IEEE Transactions on Industrial Electronics, vol. 55, no.1, Jan. 2008, pp. 11 - 20.Google Scholar

About the article

Deniss Stepins

Deniss Stepins received the B.Sc., M.Sc. and Dr.Sc.Ing degrees in electronics from Riga Technical University, Riga, Latvia, in 2004, 2006 and 2011 respectively. He is currently a researcher and lecturer in the Department of Radioelectronics, Riga Technical University. He has been involved in several research projects on the examination of spread spectrum technique for switching power converters and improvement of power magnetic components. His research interests include EMI reduction techniques applied to switching power converters, control of switch-mode power converters and planar magnetic components. He is currently an IEEE member. Postal address: Department of Radioelectronics, Riga Technical University, LV-1048, 12 Azenes street, Riga, Latvia.


Published Online: 2013-09-05

Published in Print: 2013-08-01


Citation Information: Electrical, Control and Communication Engineering, ISSN (Online) 2255-9159, ISSN (Print) 2255-9140, DOI: https://doi.org/10.2478/ecce-2013-0009.

Export Citation

This content is open access.

Comments (0)

Please log in or register to comment.
Log in