Abstract
The article presents the results of tests in order to verifying the effectiveness of the nine selected elastomeric material models (Neo-Hookean, Mooney with two and three constants, Signorini, Yeoh, Ogden, Arruda-Boyce, Gent and Marlow), which the material constants were determined in one material test - the uniaxial tension testing. The convergence assessment of nine analyzed models were made on the basis of their performance from an experimental bending test of the elastomer samples from the results of numerical calculations FEM for each material models. To calculate the material constants for the analyzed materials, a model has been generated by the stressstrain characteristics created as a result of experimental uniaxial tensile test with elastomeric dumbbell samples, taking into account the parameters received in its 18th cycle. Using such a calculated material constants numerical simulation of the bending process of a elastomeric, parallelepipedic sampleswere carried out using MARC / Mentat program.
References
[1] Ali A., Hosseini M., Sahari B.B., A review of constitutive models for Rubber-Like materials, American J. Eng. Applied Sci., 2010, 3, 232-239.10.3844/ajeassp.2010.232.239Search in Google Scholar
[2] Ramezani M., Rapin Z. M., Rubber-pad forming processes: Technology and applications, Woodhead Publishing, 2012.10.1533/9780857095497Search in Google Scholar
[3] MSC.Software: Nonlinear Finite Element Analysis of Elastomers.Search in Google Scholar
[4] Kut. S., Ryzińska G., Niedziałek B., Upsetting of elastomericmaterial. The results of numerical and experimental investigations, ZNPRz, 2015, 291, 331-338.10.7862/rm.2015.32Search in Google Scholar
[5] Huan JX, Song MF, Zhang L, et al., Transverse vibration of an axially moving slender fiber of viscoelastic fluid in bubbfil spinning and stuffer box crimping, Thermal Science, 2015, 19, 1437-144110.2298/TSCI1504437HSearch in Google Scholar
[6] Ogden, R. W. Non-Linear Elastic Deformations, Dover Publications, New York,1997.Search in Google Scholar
[7] Arruda, E. M., Boyce, M. C., A three-dimensional constitutive model for the large stretch behaviour of rubber elastic materials, J. Mech. Phys. Solids, 1993, 41, 389-41210.1016/0022-5096(93)90013-6Search in Google Scholar
[8] Gent, A. N., A new constitutive relation for rubber, Rubber Chem. Tech., 1996, 69, 59-6110.5254/1.3538357Search in Google Scholar
[9] Oden, J. T., Finite elements of nonlinear continua, McGraw-Hill, New York, 1972.Search in Google Scholar
[10] Marlow R.S., A general first-invariant hyperelastic constitutive model, Constitutive Models for Rubber III, Busfield and Muhr (eds), 2003Search in Google Scholar
[11] Zhang B, Qi H, Sun S-C, et al. A novel hybrid ant colony optimization and particle swarm optimization algorithm for inverse problems of coupled radiative and conductive heat transfer, Thermal Science, 2016, 20, 461-47210.2298/TSCI131124023ZSearch in Google Scholar
[12] MSC.Software, MSC.Marc, vol. B, Element Library, ver. 2014.Search in Google Scholar
© 2016
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.