Abstract
The typical supply system conceptions, i.e. the concepts “Just-in-time” (JIT) and “Just-in-sequence” (JIS) are very important factors with regard to a fluent operation of the assembly lines. Therefore the contemporary intra plant transport systems are being replaced by a new kind of the transportation technology, namely by means of the trains of trucks. The trains of trucks are used in two possible operational modes: either with a driver or without driver (fully automated). The trucks of the logistic trains are also cheaper and they are able to carry a larger volume and mass of the material at once. There are reduced in this way not only the investment costs, but also the operational expenses.
References
[1] Molnár V., SAPwarehousemanagement system for awarehouse of auxiliarymaterial in the selected company, In: Carpathian Logist. Congr., TANGER LTD. Ostrava, 2012, 1–6 Search in Google Scholar
[2] Andrejiová M., Pavlisková A., Husáková N., Application of multicriterion decision methods by the selection of optimal constructive elements for devices of continuous transport, In: Carpathian Logist. Congr., TANGER LTD. Ostrava, 2012, 1–6 Search in Google Scholar
[3] Gros I., Logistics, 1st ed., University of Chemistry and Technology, Praha, CR, 1996 Search in Google Scholar
[4] Kodym O., Kavka L., Sedláček M., Logistic chain data processing, International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, (18.-24. June 2015, Albena, Bulgaria), SGEM 2015, 183-190 Search in Google Scholar
[5] Lizbetin J., Caha Z. The optimization of the intermodal terminals. Nase More, 2015, 62(3), 97-100 10.17818/NM/2015/SI2Search in Google Scholar
[6] Stopka O., Cejka J., Kampf R., Bartuska L., Draft of the novel system of public bus transport lines in the particular territory. In Transport Means - Proceedings of the 19th International Scientific Conference on Transport Means. Kaunas (Lithuania): Kaunas University of Technology, 2015, 39-42 Search in Google Scholar
[7] Huang L., Ruan T., Design and application of automatic logistics system based on 2-Dimensional Bar Code, In: M. Scott (Ed.), Proceedings of the World Congress on Intelligent Control and Automation (WCICA) (29 june - 4 July 2014, Shenyang, China), Institute of Electrical and Electronics Engineers Inc., 2014, 5112- 5116 Search in Google Scholar
[8] Yan L., Liu F., Feng Z., Wei Z., Study of an automatic logistics system for the engine production line, In: M. Scott (Ed.), Proceedings of the World Congress on Intelligent Control and Automation (WCICA) (29 june - 4 July 2014, Shenyang, China), Institute of Electrical and Electronics Engineers Inc. , 2014, 5217-5221 Search in Google Scholar
[9] Liu J., Analysis on three-dimensional virtual simulation for rationality of large-scale commercial and residential space, International Conference on Advances in Materials Science and Information Technologies in Industry, AMSITI 2014, (11-12 January 2014, Xian, China), Trans Tech Publications Inc., 2014, 2307- 2310 10.4028/www.scientific.net/AMM.513-517.2307Search in Google Scholar
[10] Diu D., Zhang Y., Li J., Wu P., A model of BPF automatic logistics system based on RFID and network routing technology, In: M. Scott (Ed.), Proceedings - International Conference on Management and Service Science, MASS 2009 (20 - 22 September 2009, Suzhou, China), Suzhou Vocational University, 2009, 1335-1791 Search in Google Scholar
[11] Auguston M., Michael J., Shing T., Test automation and safety assessment in rapid systems prototyping, Proceedings of the International Workshop on Rapid System Prototyping (8 -10 June 2005, Monterey, USA), IEEE Computer Society, 2005, 188 -194 Search in Google Scholar
[12] Mircetic D., Ziramov N., Nikolicic S.,Maslaric M., Ralevic, N., Demand Forecasting in Beverage Supply Chain, Paper presented at the 3rd Olympus International Conference, In: Supply Chains (3rd Olympus ICSC), Greece, Athens, 2015, 58-65 Search in Google Scholar
[13] BilekO., Optimization of line feeding system, which is represent by manipulation devices, Bachelor thesis, University of West Bohemia, Plzen, CR, 2012 Search in Google Scholar
[14] Barova L., Material flow management, Diploma thesis, College of Logistics, Prerov, CR, 2016 Search in Google Scholar
[15] Tvrdik J., Evolution algorithm, 1st ed., University of West Bohemia, Plzen, 2004 Search in Google Scholar
[16] Cujan Z., Logistics ofmanufacturing technology, 1st ed., College of Logistics, Prerov, CR, 2013 Search in Google Scholar
[17] Cujan Z., Malek Z., Manufacturing and business logistics, 1st ed., Tomas Bata University in Zlin, Zlin, CR, 2008 Search in Google Scholar
©2016 Zdeněk Čujan and Gabriel Fedorko
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.