Abstract
This paper presents results of mechanical tests on a prototype of an innovative structural strengthening in form of self-monitoring fabric. Smart textile employs carbon fibers conductivity for measuring strains while monitoring changes of electric resistance under increasing load. A general solution was tested in a series of calibrating tests on strengthening of small size concrete slabs. Promising results of simple specimen, has encouraged the research team to perform the next tests using mastered carbon fibre reinforced fabric. Main tests were performed on natural scale RC beam. Smart textile proved its efficiency in both: strengthening and monitoring of strains during load increase. New strengthening proposal was given 10% increase of loading capacity and the readings of strain changes were similar to those obtained in classical methods. In order to calibrate the prototype and to define range limits of solution usability, textile sensor was tested in areas of large deformations (timber beam) and aswell as very small strains (bridge bearing block). In both cases, the prototype demonstrated excellent performance in the range of importance for structural engineering. This paper also presents an example of use of the smart strengthening in situ, in a real life conditions.
References
[1] Schulte K., Baron Ch., Load and Failure Analyses of CFRP Laminates by Means of Electrical Resistively Measurements, Composite Science and Technology, 1989, 36(1), 1989, 63–76 10.1016/0266-3538(89)90016-XSearch in Google Scholar
[2] Wang X., Chung D.D.L., Continuous Carbon Fibre Epoxy-Matrix Composite as a Sensor of its Own Strain, Smart Materials and Structures, 1996, 5(6), 796–800 10.1088/0964-1726/5/6/009Search in Google Scholar
[3] Todoroki A., Yoshida J., Electrical Resistance Change of Unidirectional CFRP Due to Applied Load, JSME International Journal. Series A, 2004, 47(3), 357–364 10.1299/jsmea.47.357Search in Google Scholar
[4] Giurgiutiu V., Health monitoring of Aerospace Composites, Academic Press, Elsevier, USA 2016 10.1016/B978-0-85709-523-7.00016-5Search in Google Scholar
[5] Lau K.-T., Fibre-optic sensors and smart composites for concrete applications.Magazine of Concrete Research, 2003, 55(1), 19–34 10.1680/macr.2003.55.1.19Search in Google Scholar
[6] Mufti A.A., Neale W.K., State-of-the-art of FRP and SHM applications in bridge structures in Canada. Composites & Polycon, The American Composites Manufacturers Association, Tampa, FL USA, 2007 Search in Google Scholar
[7] Zhou Z., Zhang Z., Ou J., Applications of FRP-OFBG Sensors on Bridge Cables, Proceedings of the Smart Structures & Materials/ NDE Joint Conference: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (San Diego, USA), SPIE, 2005, 1–10 10.1117/12.599823Search in Google Scholar
[8] INSYSM Project website: http://insysm.polsl.pl, 6.11.2016 Search in Google Scholar
[9] Salvado R., Lopes C., Szojda L., Araújo P., Gorski M., Velez F.J., Castro-Gomes J., Krzywon R., Carbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of Structures, Sensors, 2015, 15, 10753–10770 10.3390/s150510753Search in Google Scholar PubMed PubMed Central
©2016 M. Górski et al.
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.