Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Frequenz

Journal of RF-Engineering and Telecommunications

Editor-in-Chief: Jakoby, Rolf


IMPACT FACTOR 2017: 0.280
5-year IMPACT FACTOR: 0.297

CiteScore 2017: 0.38

SCImago Journal Rank (SJR) 2017: 0.128
Source Normalized Impact per Paper (SNIP) 2017: 0.243

Online
ISSN
2191-6349
See all formats and pricing
More options …
Volume 72, Issue 7-8

Issues

Design of a Compact Balanced Bandpass Filter based on CSRR-loaded Substrate Integrated Waveguide Structure

Hao Zhang
  • Corresponding author
  • Ministerial Key Laboratory of JGMT, Nanjing University of Science and Technology, Nanjing 210094, China
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Wei Kang / Wen Wu
Published Online: 2018-03-10 | DOI: https://doi.org/10.1515/freq-2017-0168

Abstract

A compact balanced bandpass filter (BPF) based on complementary split ring resonator (CSRR) -loaded substrate integrated waveguide (SIW) structure is reported in this paper. Both TE102 and TE201 modes of the SIW cavity can be excited under differential-mode (DM) operation with the proper positions of the balanced feeds. Meanwhile, the CSRR etched on the top layer of the substrate can also be excited by the axial electric excitation. Then, three transmission poles and two transmission zeros (TZs) have been obtained which improve the selectivity of the DM passband. To verify the above design concept, an X-band prototype operating at 8 GHz has been fabricated and measured. A good agreement is observed between the simulations and the measurements.

Keywords: compact; balanced bandpass filter (BPF); substrate integrated waveguide (SIW); complementary split ring resonator (CSRR)

Reference

  • [1]

    A. K. Horestani et al., “S-shaped complementary split ring resonators and their application to compact differential bandpass filters with common-mode suppression,” Microw. Wirel. Compon. Lett., vol. 24, no. 3, pp. 149–51, 2014.Web of ScienceCrossrefGoogle Scholar

  • [2]

    F. Wei et al., “Compact balanced dual- and tri-band BPFs based on coupled complementary split-ring resonators (C-CSRR),” IEEE Microw. Wireless Compon. Lett., vol. 26, no. 2, pp. 107–09, Feb., 2016.CrossrefWeb of ScienceGoogle Scholar

  • [3]

    X. Guo et al., “Wideband differential bandpass filters on multimode slotline resonator with intrinsic common-mode rejection,” IEEE Trans. Microw. Theory Techn., vol. 63, no. 5, pp. 1587–94, May, 2015.CrossrefGoogle Scholar

  • [4]

    X. Guo, L. Zhu, and W. Wu, “Strip-loaded slotline resonators for differential wideband bandpass filters with intrinsic common-mode rejection,” IEEE Trans. Microw. Theory Techn., vol. 64, no. 2, pp. 450–58, Feb., 2016.Google Scholar

  • [5]

    X. Xu, J. P. Wang, and L. Zhu, “A new approach to design differential-mode bandpass filters on SIW structure,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 12, pp. 635–37, Dec., 2013.Web of ScienceCrossrefGoogle Scholar

  • [6]

    X. Xu et al., “Design of balanced dual-band bandpass filter based on substrate integrated waveguide,” IET Electron. Lett., vol. 49, no. 20, pp. 1278–80, Sep. 26 2013.CrossrefGoogle Scholar

  • [7]

    Y. J. Shen et al., “Dual-band SIW differential bandpass filter with improved common-mode suppression,” IEEE Microw. Wireless Compon. Lett., vol. 25, no. 2, pp. 100–02, Feb., 2015.Web of ScienceCrossrefGoogle Scholar

  • [8]

    K. Zhou, W. Kang, and W. Wu, “Compact dual-band balanced bandpass filter based on double-layer SIW structure,” Electron. Lett., vol. 52, no. 18, pp. 1537–39, Sep., 2016.Web of ScienceCrossrefGoogle Scholar

  • [9]

    P. Li et al., “Compact dual-band balanced SIW bandpass filter with improved common-mode suppression,” IEEE Microw. Wireless Compon. Lett., vol. 27, no. 4, pp. 347–49, Apr., 2017.Web of ScienceCrossrefGoogle Scholar

  • [10]

    M. Y. Chen, W. C. Hong, and M. H. Ho, “Differential-mode BPF design using folded substrate integrated waveguide cavities,” European Micro. Conf., pp. 1030–32, 2015.Google Scholar

  • [11]

    M. Y. Chen, W. C. Hong, and M. H. Ho, “Balanced BPF design of substrate-integrated waveguide cavity using hybrid microstrip/slot feed for CM suppression,” Electron. Lett., vol. 50, no. 21, pp. 1533–34, Oct., 2014.CrossrefWeb of ScienceGoogle Scholar

  • [12]

    M. H. Ho and C. S. Li, “Novel balanced bandpass filters using substrate integrated half-mode waveguide,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 2, pp. 78–80, Feb., 2013.CrossrefWeb of ScienceGoogle Scholar

  • [13]

    S. P. Zhou et al., “A novel X-band half mode substrate integrated waveguide (HMSIW) bandpass filter,” Asia Pacific Micro. Conf., pp. 1387–89, 2009.Google Scholar

  • [14]

    S. Moitra et al., “Band pass filter design using half mode substrate integrated waveguide (HMSIW) with periodically loaded F-EBG structures,” IEEE Students’ Technology Symp. (TechSym), pp. 192–95, 2016.Google Scholar

  • [15]

    Z. Q. Yang et al., “Compact wideband HMSIW bandpass filter with defected ground structure,” IEEE Inter. Conf. On Signal Processing, Communications and Computing (ICSPCC), pp. 1–4, 2015.Google Scholar

  • [16]

    Y. Cai et al., “HMSIW bandstop filter loaded with half complementary split-ring resonator,” Electron. Lett., vol. 51, no. 8, pp. 632–33, Apr., 2015.Web of ScienceCrossrefGoogle Scholar

  • [17]

    S. Amari and U. Rosenberg, “Characteristics of cross (bypass) coupling through higher/lower order modes and their applications in elliptic filter Design,” Trans. Microw. Theory Tech., vol. 53, no. 10, pp. 3135–41, Jun., 2005.CrossrefGoogle Scholar

About the article

Received: 2017-07-25

Published Online: 2018-03-10

Published in Print: 2018-06-26


Citation Information: Frequenz, Volume 72, Issue 7-8, Pages 381–384, ISSN (Online) 2191-6349, ISSN (Print) 0016-1136, DOI: https://doi.org/10.1515/freq-2017-0168.

Export Citation

© 2018 Walter de Gruyter GmbH, Berlin/Boston.Get Permission

Comments (0)

Please log in or register to comment.
Log in