Jump to ContentJump to Main Navigation
Show Summary Details
More options …
Wood Research and Technology


Cellulose – Hemicelluloses – Lignin – Wood Extractives

Editor-in-Chief: Salmén, Lennart

Editorial Board: Daniel, Geoffrey / Militz, Holger / Rosenau, Thomas / Sixta, Herbert / Vuorinen, Tapani / Argyropoulos, Dimitris S. / Balakshin, Yu / Barnett, J. R. / Burgert, Ingo / Rio, Jose C. / Evans, Robert / Evtuguin, Dmitry V. / Frazier, Charles E. / Fukushima, Kazuhiko / Gindl-Altmutter, Wolfgang / Glasser, W. G. / Holmbom, Bjarne / Isogai, Akira / Kadla, John F. / Koch, Gerald / Lachenal, Dominique / Laine, Christiane / Mansfield, Shawn D. / Morrell, J.J. / Niemz, Peter / Potthast, Antje / Ragauskas, Arthur J. / Ralph, John / Rice, Robert W. / Salin, Jarl-Gunnar / Schmitt, Uwe / Schultz, Tor P. / Sipilä, Jussi / Takano, Toshiyuki / Tamminen, Tarja / Theliander, Hans / Welling, Johannes / Willför, Stefan / Yoshihara, Hiroshi

IMPACT FACTOR 2018: 2.579

CiteScore 2018: 2.43

SCImago Journal Rank (SJR) 2018: 0.829
Source Normalized Impact per Paper (SNIP) 2018: 1.082

See all formats and pricing
More options …
Volume 58, Issue 1


Comparative analysis of inactivated wood surfaces

M. Šernek / F. A. Kamke / W. G. Glasser
Published Online: 2005-06-01 | DOI: https://doi.org/10.1515/HF.2004.004


The surface inactivation of two wood species, yellow poplar (Liriodendron tulipifera) and southern pine (Pinus taeda), was studied following high temperature drying. Surface analysis involved X-ray photoelectron spectroscopy, sessile drop wettability and fracture mechanics of the adhesively-jointed surfaces. The results showed that wood drying at high temperature (i.e., >160 to 180 °C) caused modifications in surface composition. The oxygen to carbon ratio (O/C) decreased and the ratio of carbon atoms bonded to other carbon or to hydrogen atoms vis-à-vis carbons bonded to oxygen atoms (i.e., the C1/C2 ratio) increased with drying temperature. In addition, the contact angle increased with the temperature of exposure, but decreased with time. A dependence on wood species was evident: southern pine surfaces always exhibited higher contact angles than yellow poplar. Also, the rate of contact angle decline with time, dθ/dt, was found to vary with surface composition: this rate corresponded to O/C ratio-changes, especially in the case of southern pine. Southern pine was most susceptible to inactivation particularly when bonded with PF adhesive. Yellow poplar surfaces did not show significant inactivation when exposed to drying temperatures below ca. 180 °C. The results are explained by a relative enrichment of wood surfaces with non-polar substances, hydrophobic extractives and volatile organic compounds that 'become visually evident during the drying process at temperatures above ca. 160 °C. Little change was observed if drying temperatures remained below 150 °C.

About the article

Published Online: 2005-06-01

Published in Print: 2004-02-05

Citation Information: Holzforschung, Volume 58, Issue 1, Pages 22–31, ISSN (Print) 0018-3830, DOI: https://doi.org/10.1515/HF.2004.004.

Export Citation

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

Flávia Maria Silva Brito and Geraldo Bortoletto Júnior
Revista Árvore, 2019, Volume 43, Number 1
Yasemin Seki, Serhan Köktaş, Ahmet Çağrı Kılınç, and Ramazan Dalmis
Materials Research Express, 2019, Volume 6, Number 8, Page 085104
Susanna Källbom, Michael Altgen, Holger Militz, and Magnus Wålinder
Wood and Fiber Science, 2018, Volume 50, Number 3, Page 346
Sven Gerullis, Björn Sten-Mark Kretzschmar, Andreas Pfuch, Oliver Beier, Mario Beyer, and Bernd Grünler
Plasma Processes and Polymers, 2018, Page e1800058
Wenhua Lyu, Yuan Shi, Yaxian Zheng, and Xing’e Liu
Journal of Forestry Research, 2018
Scott Renneckar and Yu Zhou
ACS Applied Materials & Interfaces, 2009, Volume 1, Number 3, Page 559
Minzhen Bao, Xianai Huang, Mingliang Jiang, Neng Li, Yanglun Yu, and Wenji Yu
Journal of Wood Science, 2018
Ahmet Çağrı Kılınç, Serhan Köktaş, Yasemin Seki, Metehan Atagür, Ramazan Dalmis, Ümit Halis Erdoğan, Ali Aydın Göktaş, and M. Özgür Seydibeyoğlu
Composites Part B: Engineering, 2017
Benedito Rocha Vital, Paulo Ivan Lima Andrade, Angélica de Cássia Oliveira Carneiro, Carla Priscilla Távora Cabral, and Ana Márcia Macêdo Carvalho
Revista Árvore, 2014, Volume 38, Number 5, Page 951
Nigel R. Messmer, Erick G. R. Anjos, Lilia M. Guerrini, and Maurício P. Oliveira
The Journal of Adhesion, 2017, Page 1
Doroteja Vnučec, Jure Žigon, Marica Mikuljan, Frederick A. Kamke, Milan Šernek, Andreja Kutnar, and Andreja Goršek
European Journal of Wood and Wood Products, 2017, Volume 75, Number 5, Page 767
Ghaneh Mirzaei, Behbood Mohebby, and Ghanbar Ebrahimi
Wood Material Science & Engineering, 2016, Page 1
Bernard Thibaut, Louis Denaud, Robert Collet, Rémy Marchal, Jacques Beauchêne, Frédéric Mothe, Pierre-Jean Méausoone, Patrick Martin, Pierre Larricq, and Florent Eyma
Annals of Forest Science, 2016, Volume 73, Number 1, Page 163
Chenjing Han, Tianyi Zhan, Jinmei Xu, Jinghui Jiang, and Jianxiong Lu
Drying Technology, 2015, Volume 33, Number 6, Page 735
Luigi Todaro, Maurizio D'Auria, Fausto Langerame, Anna Maria Salvi, and Antonio Scopa
Surface and Interface Analysis, 2015, Volume 47, Number 2, Page 206
Pavlo Bekhta, Stanisław Proszyk, and Tomasz Krystofiak
European Journal of Wood and Wood Products, 2014, Volume 72, Number 6, Page 785
Douglas J. Gardner, Melanie Blumentritt, Lu Wang, and Nadir Yildirim
Reviews of Adhesion and Adhesives, 2014, Volume 2, Number 2, Page 127
Maziar Sedighi Moghaddam, Magnus E.P. Wålinder, Per M. Claesson, and Agne Swerin
Langmuir, 2013, Volume 29, Number 39, Page 12145
Mirko Kariz, Manja Kitek Kuzman, and Milan Sernek
Journal of Adhesion Science and Technology, 2013, Volume 27, Number 17, Page 1911
Ugovšek Aleš, Frederick A. Kamke, Milan Sernek, Matjaž Pavlič, and Andreja Kutnar
European Journal of Wood and Wood Products, 2013, Volume 71, Number 3, Page 371
Ruili Yang, Yu Chen, Yulong Wu, Derun Hua, Mingde Yang, Chun Li, Zhen Chen, and Ji Liu
Energy & Fuels, 2013, Volume 27, Number 5, Page 2619
Andreja Kutnar, Borut Kričej, Matjaž Pavlič, and Marko Petrič
Journal of Adhesion Science and Technology, 2013, Volume 27, Number 9, Page 963
Mirko Kariz and Milan Sernek
Journal of Adhesion Science and Technology, 2010, Volume 24, Number 8-10, Page 1703
Jessica D. Jennings, Audrey Zink-Sharp, Charles E. Frazier, and Frederick A. Kamke
Journal of Adhesion Science and Technology, 2006, Volume 20, Number 4, Page 335
Yu Chen, Yulong Wu, Peiling Zhang, Derun Hua, Mingde Yang, Chun Li, Zhen Chen, and Ji Liu
Bioresource Technology, 2012, Volume 124, Page 190
Rafael Farinassi Mendes, Geraldo Bortoletto Júnior, Natalie Ferreira de Almeida, Paula Gabriella Surdi, and Isabela Najm Barbeiro
Wood Science and Technology, 2013, Volume 47, Number 2, Page 243
Duygu Kocaefe, Xianai Huang, Yasar Kocaefe, and Yaman Boluk
Surface and Interface Analysis, 2013, Volume 45, Number 2, Page 639
Xianai Huang, Duygu Kocaefe, Yasar Kocaefe, Yaman Boluk, and Andre Pichette
Polymer Degradation and Stability, 2012, Volume 97, Number 7, Page 1197
Andreja Kutnar, Lauri Rautkari, Kristiina Laine, and Mark Hughes
European Journal of Wood and Wood Products, 2012, Volume 70, Number 5, Page 727
Pavlo Bekhta, Peter Niemz, and Jan Sedliacik
European Journal of Wood and Wood Products, 2012, Volume 70, Number 1-3, Page 99
William T.Y. Tze, George Bernhardt, Douglas J. Gardner, and Alfred W. Christiansen
International Journal of Adhesion and Adhesives, 2006, Volume 26, Number 7, Page 550
João Custódio, James Broughton, and Helena Cruz
International Journal of Adhesion and Adhesives, 2009, Volume 29, Number 2, Page 173
Andreja Kutnar, Frederick A. Kamke, Marko Petrič, and Milan Sernek
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2008, Volume 329, Number 1-2, Page 82
Guangping Han, Wanli Cheng, James Deng, Chunping Dai, Shuyin Zhang, and Qinglin Wu
Industrial Crops and Products, 2009, Volume 30, Number 1, Page 48
Nadir Ayrilmis, Songklod Jarusombuti, Vallayuth Fueangvivat, and Piyawade Bauchongkol
Polymer Degradation and Stability, 2011, Volume 96, Number 5, Page 818
Boštjan Lesar, Matjaž Pavlič, Marko Petrič, Andrijana Sever Škapin, and Miha Humar
Polymer Degradation and Stability, 2011, Volume 96, Number 7, Page 1271
Philippe Gérardin, Marko Petrič, Mathieu Petrissans, Jacques Lambert, and Jean Jacques Ehrhrardt
Polymer Degradation and Stability, 2007, Volume 92, Number 4, Page 653
Papa Niokhor Diouf, Tatjana Stevanovic, Alain Cloutier, Chang-Hua Fang, Pierre Blanchet, Ahmed Koubaa, and Nicolas Mariotti
Applied Surface Science, 2011, Volume 257, Number 8, Page 3558
Na Liu, Shulan Shi, Yang Gao, and Menghua Qin
Enzyme and Microbial Technology, 2009, Volume 44, Number 2, Page 89
Nadir Ayrilmis and Umit Buyuksari
Drying Technology, 2011, Volume 29, Number 5, Page 591
Songklod Jarusombuti, Nadir Ayrilmis, Vallayuth Fueangvivat, and Piyawade Bauchongkol
High Temperature Materials and Processes, 2011, Volume 30, Number 3
G. Nguila Inari, M. Pétrissans, S. Dumarcay, J. Lambert, J. J. Ehrhardt, M. Šernek, and P. Gérardin
Wood Science and Technology, 2011, Volume 45, Number 2, Page 369
Hassine Bouafif, Ahmed Koubaa, Patrick Perré, Alain Cloutier, and Bernard Riedl
Journal of Applied Polymer Science, 2009, Volume 113, Number 1, Page 593
Andreja Kutnar, Frederick A. Kamke, and Milan Sernek
Holz als Roh- und Werkstoff, 2008, Volume 66, Number 6, Page 439
Rosilei A. Garcia, Bernard Riedl, and Alain Cloutier
Journal of Materials Science, 2008, Volume 43, Number 15, Page 5037
J. Follrich, U. Müller, and W. Gindl
Holz als Roh- und Werkstoff, 2006, Volume 64, Number 5, Page 373
W. Paul, M. Ohlmeyer, H. Leithoff, M.J. Boonstra, and A. Pizzi
Holz als Roh- und Werkstoff, 2006, Volume 64, Number 3, Page 227
Milan Sernek, Michiel Boonstra, Antonio Pizzi, Aurelien Despres, and Philippe Gérardin
Holz als Roh- und Werkstoff, 2008, Volume 66, Number 3, Page 173
Maria Odrášková, Jozef Ráhel’, Anna Zahoranová, Radovan Tiňo, and Mirko Černák
Plasma Chemistry and Plasma Processing, 2008, Volume 28, Number 2, Page 203
Hooshang Pakdel, Pierre-Louis Cyr, Bernard Riedl, and James Deng
Wood Science and Technology, 2008, Volume 42, Number 2, Page 133
Ildikó Mohammed-Ziegler, Zoltán Hórvölgyi, András Tóth, Willis Forsling, and Allan Holmgren
Polymers for Advanced Technologies, 2006, Volume 17, Number 11-12, Page 932
G. Nguila Inari, M. Petrissans, J. Lambert, J. J. Ehrhardt, and P. Gérardin
Surface and Interface Analysis, 2006, Volume 38, Number 10, Page 1336

Comments (0)

Please log in or register to comment.
Log in