Abstract
The objectives of this study were to improve the dimensional stability of medium-density fibreboard (MDF) by heat treatment and to determine the effects of the treatment on the mechanical properties and vertical density profile of the panels. MDF panels were produced from untreated fibres and fibres treated at two different temperatures (150 and 180°C) for 15, 30 and 60 min. Panels produced from heat-treated fibres showed an important reduction in thickness swelling and water absorption after water soaking. Linear expansion and contraction were not improved by the treatment. Thickness swelling after repeated cycles of adsorption and desorption increased, while thickness shrinkage under the same conditions was not changed by the treatment. The springback of panels after repeated cycles of adsorption and desorption was not improved, either. Statistical analyses did not show significant differences in the modulus of rupture, modulus of elasticity and internal bond strength of panels following heat treatment. No significant effect was found for the vertical density profile of panels following heat treatment, although the profiles for panels produced from heat-treated fibres were flatter than those produced from untreated fibres.
References
ANSI standard (2002) A208.2-2002. Medium density fiberboard (MDF) for interior applications.Search in Google Scholar
ASTM standard (1996) D1037-96a. Standard test methods for evaluating properties of wood-based and particle panel materials.Search in Google Scholar
Bourgois, J., Bartholin, M.C., Guyonnet, R. (1989) Thermal treatment of wood: analysis of the obtained product. Wood. Sci. Technol.23:303–310.10.1007/BF00353246Search in Google Scholar
Geibler, E. (1983) Dimensional stabilization of wood by moisture-heat-pressure treatment. Holz Roh Werkstoff41:87–94.Search in Google Scholar
Hsu, W.E., Schwald, W., Shields, J.A. (1989) Chemical and physical changes required for producing dimensionally stable wood-based composites. Wood Sci. Technol.23:281–288.10.1007/BF00367742Search in Google Scholar
Kamdem, D.P., Pizzi, A., Jermannaud, A. (2002) Durability of heat-treated wood. Holz Roh Werkstoff60:1–6.10.1007/s00107-001-0261-1Search in Google Scholar
Kollman, F., Fengel, D. (1965) Changes in the chemical composition of wood by thermal treatment. Holz Roh Werkstoff23:461–468.Search in Google Scholar
Lehmann, W.F. (1964) Retarding dimensional changes in particleboards. Information Circular 20. Oregon State University, Corvallis, OR, USA.Search in Google Scholar
Rowell, R.M. (1988) Can the cell wall be stabilized? In: Wood Science Seminar: Stabilization of the Cell Wall. Ed. Suchsland, O. East Lansing, MI, USA: Michigan State University. pp. 53–63.Search in Google Scholar
Rowell, R.M., Kawai, S., Inoue, M. (1995) Dimensional stabilized, very low density fiberboard. Wood Fiber Sci.27:428–436.Search in Google Scholar
Rowell, R., Lange, S., McSweeny, J., Davis, M. (2002) Modification of wood fiber using steam. In: 6th Pacific Rim Bio-Based Composites Symposium. Workshop on the Chemical Modification of Cellulosics, Portland, Oregon, USA, Vol. 2, pp. 606–615.Search in Google Scholar
SAS (1999) SAS OnlineDoc®, Version 8. SAS Institute Inc., Cary, NC, USA (http://v8doc.sas.com/sashtml).Search in Google Scholar
Stamm, A.J. (1964) Dimensional stabilization. In: Wood and Cellulose Science. Ronald Press, New York. 549 pp.Search in Google Scholar
Tomek, A. (1966) Die Heißvergütung von Holzspänen, ein neues Verfahren zum Hydrophobieren von Spanplatten. Holztechnologie7:157–160.Search in Google Scholar
Viitaniemi, P., Jämsä, S. (1994) Modification of wood with heat treatment. Report Publication 814. VTT Research, Espoo, Finland.Search in Google Scholar
©2006 by Walter de Gruyter Berlin New York