Jump to ContentJump to Main Navigation
Show Summary Details
More options …

High Temperature Materials and Processes

Editor-in-Chief: Fukuyama, Hiroyuki

Editorial Board: Waseda, Yoshio / Fecht, Hans-Jörg / Reddy, Ramana G. / Manna, Indranil / Nakajima, Hideo / Nakamura, Takashi / Okabe, Toru / Ostrovski, Oleg / Pericleous, Koulis / Seetharaman, Seshadri / Straumal, Boris / Suzuki, Shigeru / Tanaka, Toshihiro / Terzieff, Peter / Uda, Satoshi / Urban, Knut / Baron, Michel / Besterci, Michael / Byakova, Alexandra V. / Gao, Wei / Glaeser, Andreas / Gzesik, Z. / Hosson, Jeff / Masanori, Iwase / Jacob, Kallarackel Thomas / Kipouros, Georges / Kuznezov, Fedor


IMPACT FACTOR 2018: 0.427
5-year IMPACT FACTOR: 0.471

CiteScore 2018: 0.58

SCImago Journal Rank (SJR) 2018: 0.231
Source Normalized Impact per Paper (SNIP) 2018: 0.377

Open Access
Online
ISSN
2191-0324
See all formats and pricing
More options …
Volume 30, Issue 1-2

Issues

Effects of Density Profile and Hot Press Diagram on the Some Technological Properties of Particleboard Composite

Selahattin Bardak / Gökay Nemli / Bünyamin Sari / Mehmet Baharoǧlu / Emir Zekoviç

Abstract

In this study, the effects of density profile and hot press diagram on the technological properties of particleboard were analyzed. Physical and mechanical properties of particleboards were evaluated. Density profile was found a main parameter affecting quality properties of particleboard. While increasing entrance pressure improved the modulus of rupture and elasticity, and thickness swelling of the panels, increasing exit pressure was found to be effective on the bonding strength and thickness swelling. Exit pressure did not statistically affect the bending properties. Decreasing feeding speed of the hot press significantly improved all of the properties. While high surface density improved the modulus of rupture and elasticity, and thickness swelling, high core density caused better internal bond strength and thickness swelling. Entrance pressure was found to be effective on the surface density of particleboard. Exit pressure did not statistically affect the surface density, however, increased the core density.

Keywords.: Particleboard; hot press diagram; mechanical properties; density profile; physical properties

About the article

Corresponding author: Gökay Nemli, Faculty of Forestry, Karadeniz Technical University, 61080 Trabzon, Turkey


Received: 2010-07-14

Accepted: 2010-07-23

Published in Print: 2011-04-01


Citation Information: High Temperature Materials and Processes, Volume 30, Issue 1-2, Pages 31–37, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: https://doi.org/10.1515/htmp.2011.004.

Export Citation

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
Mehmet Baharoğlu, Gökay Nemli, Bünyamin Sarı, Selahattin Bardak, and Nadir Ayrılmış
Composites Part B: Engineering, 2012, Volume 43, Number 5, Page 2448

Comments (0)

Please log in or register to comment.
Log in