Jump to ContentJump to Main Navigation
Show Summary Details
More options …

High Temperature Materials and Processes

Editor-in-Chief: Fukuyama, Hiroyuki

Editorial Board: Waseda, Yoshio / Fecht, Hans-Jörg / Reddy, Ramana G. / Manna, Indranil / Nakajima, Hideo / Nakamura, Takashi / Okabe, Toru / Ostrovski, Oleg / Pericleous, Koulis / Seetharaman, Seshadri / Straumal, Boris / Suzuki, Shigeru / Tanaka, Toshihiro / Terzieff, Peter / Uda, Satoshi / Urban, Knut / Baron, Michel / Besterci, Michael / Byakova, Alexandra V. / Gao, Wei / Glaeser, Andreas / Gzesik, Z. / Hosson, Jeff / Masanori, Iwase / Jacob, Kallarackel Thomas / Kipouros, Georges / Kuznezov, Fedor


IMPACT FACTOR 2018: 0.427
5-year IMPACT FACTOR: 0.471

CiteScore 2018: 0.58

SCImago Journal Rank (SJR) 2018: 0.231
Source Normalized Impact per Paper (SNIP) 2018: 0.377

Open Access
Online
ISSN
2191-0324
See all formats and pricing
More options …
Volume 30, Issue 1-2

Issues

The Production of Cracks Evolution in Continuously Cast Steel Slab

Martin Vlado / Róbert Bidulský / Lucia Gulová / Kristína Machová / Jana Bidulská / Ján Valíček / Ján Sas
Published Online: 2011-04-19 | DOI: https://doi.org/10.1515/htmp.2011.014

Abstract

The prediction of evaluation a U- and V-shaped cracks on the surface and subsurface of a continuously cast steel slab, is investigated during hot rolling. The numerical simulation is carried out by means of FE-code DEFORM 3D. Therefore, an algorithmic decision tree was developed by the C 4.5 program and applied in prediction of surface and subsurface defects behaviour during the numerical simulation of hot rolling. Cracks were selected as a transversal and longitudinal to the rolling direction. In addition to the transversal and vertical U- and V-shaped cracks on the surface; subsurface defect, referred as “circle hole”, on the side part of workpiece were evaluated. In terms of surface defects evolution, U-shaped cracks show a deteriorating influence during hot rolling. On the basis of the algorithmic decision tree established, the prediction of cracks evolution (defined before plastic deformation process) during hot rolling is examined.

Keywords.: Continuously cast steel slab; hot rolling; defects and simulation

About the article

Corresponding author: Róbert Bidulský, Politecnico di Torino-Alessandria Campus, Viale T. Michel 5, 15100 Alessandria, Italy


Received: 2010-09-17

Accepted: 2010-10-08

Published Online: 2011-04-19

Published in Print: 2011-04-01


Citation Information: High Temperature Materials and Processes, Volume 30, Issue 1-2, Pages 105–111, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: https://doi.org/10.1515/htmp.2011.014.

Export Citation

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
M. Nioi, S. Celotto, C. Pinna, E. Swart, and H. Ghadbeigi
Journal of Materials Processing Technology, 2017, Volume 249, Page 302
[2]
Liming Zhao, Qi Ouyang, Dengfu Chen, Jayaram K. Udupa, Huiqian Wang, and Yuebin Zeng
Review of Scientific Instruments, 2014, Volume 85, Number 11, Page 115004

Comments (0)

Please log in or register to comment.
Log in