Jump to ContentJump to Main Navigation
Show Summary Details
More options …

High Temperature Materials and Processes

Editor-in-Chief: Fukuyama, Hiroyuki

Editorial Board: Waseda, Yoshio / Fecht, Hans-Jörg / Reddy, Ramana G. / Manna, Indranil / Nakajima, Hideo / Nakamura, Takashi / Okabe, Toru / Ostrovski, Oleg / Pericleous, Koulis / Seetharaman, Seshadri / Straumal, Boris / Suzuki, Shigeru / Tanaka, Toshihiro / Terzieff, Peter / Uda, Satoshi / Urban, Knut / Baron, Michel / Besterci, Michael / Byakova, Alexandra V. / Gao, Wei / Glaeser, Andreas / Gzesik, Z. / Hosson, Jeff / Masanori, Iwase / Jacob, Kallarackel Thomas / Kipouros, Georges / Kuznezov, Fedor


IMPACT FACTOR 2018: 0.427
5-year IMPACT FACTOR: 0.471

CiteScore 2018: 0.58

SCImago Journal Rank (SJR) 2018: 0.231
Source Normalized Impact per Paper (SNIP) 2018: 0.377

Open Access
Online
ISSN
2191-0324
See all formats and pricing
More options …
Volume 30, Issue 1-2

Issues

Mechanical and Electrical Properties of Alloys and Isothermal Section of Ternary Cu-In-Sb System at 673 K

Duško Minić / Ajka Aljilji / Milan Kolarević / Dragan Manasijević / Dragana Živković
Published Online: 2011-04-19 | DOI: https://doi.org/10.1515/htmp.2011.019

Abstract

Lead-free solders with copper represent possible substitution for standard lead-tin solders. For the complete definition of the properties of the ternary Bi-Cu-In system, there were performed the investigation of micro structures, hardness by Brinel, and electric conductivity of the alloys. In the range of this ternary system, numerous alloys were tested for three vertical sections, with molar ratio Sb : Cu = 1, Cu : In = 1, Sb : In = 1. The micro structures of the alloys were investigated by application of optic microscopy. By application of CALPHAD method, and software package PANDAT 8.1. there were calculated the isothermal cross sections at 298 K and 673 K. The experimentally obtained phase compositions in microstructures are in a good agreement with phases on calculated cross sections.

Keywords.: Bi-Cu-In ternary system; microstructure; hardness; electric conductivity; isothermal sections

About the article

Corresponding author: Duško Minić, Faculty of Technical Sciences, Knjaza Milosa 7, 38220, Kosovska Mitrovica, Republic of Serbia


Received: 2010-10-18

Accepted: 2010-11-12

Published Online: 2011-04-19

Published in Print: 2011-04-01


Citation Information: High Temperature Materials and Processes, Volume 30, Issue 1-2, Pages 131–138, ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: https://doi.org/10.1515/htmp.2011.019.

Export Citation

Comments (0)

Please log in or register to comment.
Log in