Jump to ContentJump to Main Navigation
Show Summary Details
More options …

High Temperature Materials and Processes

Editor-in-Chief: Fukuyama, Hiroyuki

Editorial Board: Waseda, Yoshio / Fecht, Hans-Jörg / Reddy, Ramana G. / Manna, Indranil / Nakajima, Hideo / Nakamura, Takashi / Okabe, Toru / Ostrovski, Oleg / Pericleous, Koulis / Seetharaman, Seshadri / Straumal, Boris / Suzuki, Shigeru / Tanaka, Toshihiro / Terzieff, Peter / Uda, Satoshi / Urban, Knut / Baron, Michel / Besterci, Michael / Byakova, Alexandra V. / Gao, Wei / Glaeser, Andreas / Gzesik, Z. / Hosson, Jeff / Masanori, Iwase / Jacob, Kallarackel Thomas / Kipouros, Georges / Kuznezov, Fedor


IMPACT FACTOR 2018: 0.427
5-year IMPACT FACTOR: 0.471

CiteScore 2018: 0.58

SCImago Journal Rank (SJR) 2018: 0.231
Source Normalized Impact per Paper (SNIP) 2018: 0.377

Open Access
Online
ISSN
2191-0324
See all formats and pricing
More options …
Ahead of print

Issues

Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel

J. Maniraj
  • Corresponding author
  • Assistant Professor, Department of Mechanical Engineering, Park College of Engineering Technology, Kaniyur, Coimbatore, Tamilnadu, India.
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ V. Selladurai
  • Principal and Head, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, Tamilnadu, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ N. Sivashanmugam
  • Assistant Professor, Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ S. Arungalai Vendan
  • Associate Professor, Department of Electrical and Electronics Engineering, Vel Tech University, Chennai, Tamilnadu, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ S. Myilswamy
  • Assistant Professor, Department of Mechanical Engineering, Park College of Engineering Technology, Kaniyur, Coimbatore, Tamilnadu, India.
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2012-06-12 | DOI: https://doi.org/10.1515/htmp-2011-0142

Abstract

This experimental study aims at investigating the optimization of hard finish turning operation parameters for martensitic stainless steel using the analysis of variance (ANOVA) and back propagation neural network (BPNN). Experimental trials are carried out based on an orthogonal array of Taguchi method. The recorded data are assessed and evaluated using ANOVA and artificial neural network (ANN) techniques. A multilayer perception model is constructed with back-propagation algorithm using the input parameters of depth of cut, cutting speed and feed rate. Crater wear and surface roughness of the machined component are the output parameters. On completion of the experimental test, ANOVA and ANN models are employed to validate the results obtained and further to predict the behavior of the system under conditions within the prevailing operating range.

Keywords.: Taguchi method; hard finish turning; BPNN; ANOVA; surface roughness; crater wear

About the article

Received: 2012-03-13

Accepted: 2012-04-10

Published Online: 2012-06-12


Citation Information: High Temp. Mater. Proc., ISSN (Online) 2191-0324, ISSN (Print) 0334-6455, DOI: https://doi.org/10.1515/htmp-2011-0142.

Export Citation

©2012 by Walter de Gruyter Berlin Boston.Get Permission

Comments (0)

Please log in or register to comment.
Log in