Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter January 5, 2019

New Monitoring Program of Transformer Substation Foundation Settlement

  • Jin-Lei Hu , Wen-Bo Wang , Zhemin Zhang , Kun Zhang , Kui Hua EMAIL logo and Ran Chen

Abstract

In order to solve the problem of foundation settlement monitoring, this paper presents a monitoring program of substation foundation settlement, which is based on the distributed optical sensing technology. The composition of the hardware monitoring system and the wiring scheme of stress optical cables were described. The results of simulation experiment showed that the Brillouin optical time domain analysis could well meet the precision requirements of substation settlement monitoring. Moreover, the temperature reference optical fibers should be laid for temperature compensation. This paper can provide the basis for further prevention of substation foundation settlement.

Funding statement: Project Supported by the science-technology program of Guangdong Grid Corporation of China (031800KK2160005).

References

[1] Huang Q. Analysis and countermeasures of the settlement of soft subgrade in Zhuhai substation project. Mod Manuf. 2014;33:3–5.Search in Google Scholar

[2] Chen X. Risk assessment of geological hazards in a 110 kV Substation. Shanxi Coal. 2014;34:36–37.Search in Google Scholar

[3] Luo Y. Analysis of soft soil foundation treatment method for substation project in Pearl River Delta. Eng Constr Des. 2014;9:68–70.Search in Google Scholar

[4] Xu L. Analysis and treatment of settlement of soft foundation substation. Zhejiang Electr Power. 2006;5:35–39.Search in Google Scholar

[5] Sui H, Shi B, Zhang D, Wang B, Wei G, Piao C. Study on distributed optical fiber sensor-based monitoring for slope engineering. Chin J Rock Mech Eng. 2008;27:3725–31.Search in Google Scholar

[6] Zhu H, Yin J, Hong C, Jin W, He Y. Fiber optic based monitoring technologies of slope engineering. Geotech Invest Surv. 2010;38:6–10.Search in Google Scholar

[7] Zhu H, Shi B, Yan J, Chen C, Li Y, Wang J, et al. Physical model testing of slope stability based on distributed fiber-optic strain sensing technology. Chin J Rock Mech Eng. 2013;32:821–28.Search in Google Scholar

[8] Lu Y, Shi B, Xi J, Su J, Jiang Y, Li Y. Field study of BOTDR-based distributed monitoring technology for ground fissures. J Eng Geol. 2014;22:8–13.Search in Google Scholar

[9] Ye Y, Zhao X, Wu G, Xie X, Yao J. Application of distributed optical fiber in the monitoring of cracks in concrete structures. J Civ Archit Environ Eng. 2018;40:24–28.Search in Google Scholar

[10] Ye Y, Ye F, Zhao X, Li J, Wu G, Xie X, et al. Research on strain measure in reinforced concrete beams with distributed optical fiber. Low Temp Archit Technol. 2017;39:40–44.Search in Google Scholar

[11] Wang J, Yang Z. The application of BOTDR in OPGW fiber optic cable automatic monitoring. Power Syst Commun. 2011;32:39–43.Search in Google Scholar

[12] Wu R, Zhu S, Zhang W, Deng Y, Zhang W. Fiber optic ground stress analysis based on brillouin scattering and correlation factor method. Guangdong Electr Power. 2015;28:89–92,109.Search in Google Scholar

[13] Zhu H, Shi B, Yan Y, Chen C, Li X, Wang J, et al. Slope model test based on distributed optical fiber strain sensing. J Rock Mech Eng. 2013;32:821–28Search in Google Scholar

[14] Zhu Hongxuan, Yin Jianhua, Hong Chengyu, Jin Wei, He Yiliang. Slope engineering monitoring technology based on optical fiber sensing. Eng Invest. 2010;38:6–10,14Search in Google Scholar

[15] Yan Haibo, Shi Bin, Zhang Dan, Wang Baojun, Wei Guangqing, Pu Chundei, et al. Research on distributed optical fiber monitoring technology for slope engineering. Chin J Rock Mech Eng. 2008;27:3725–31Search in Google Scholar

[16] Chen Q, Wang Y, Huang S, Chen Y, Li Q. Study on the law of contamination accumulation affected by typical pollution sources in hainan power grid. Chin Electr Power. 2015;8:36–38.Search in Google Scholar

[17] Zhang R, Wu G, Liu Y, Wang H. On-line monitoring and application of salt-dense and gray-dense insulators by optical technology. High Voltage Technol. 2010;36:1513–19.Search in Google Scholar

[18] Yang L, Shi Z, Huang J, Hao Y, Gan J, Cao M. Field test of overhead line temperature detection based on BOTDR distributed fiber sensor technology. High Voltage Eng. 2015;41:925–30.Search in Google Scholar

[19] Nikles M, Thevenaz L, Robert PA. Brillouin gain spectrum characterization in single-mode optical fibers. J Lightwave Technol. 1997;15:1842–51.10.1109/50.633570Search in Google Scholar

[20] Parker TR, Farhadiroushan M, VA Handerek, AJ Rogers. A fully distributed simultaneous strain and temperature sensor using spontaneous Brillouin backscatter. IEEE Photonics Technol Lett. 1997;9:979–8110.1109/68.593372Search in Google Scholar

[21] Bernini R, Minardo A, Zeni L. Reconstruction technique for stimulated Brillouin scattering distributed fiber-optic sensors. Opt Eng. 2002;41:2186–95.10.1117/1.1497176Search in Google Scholar

Received: 2018-07-21
Revised: 2018-10-21
Accepted: 2018-11-16
Published Online: 2019-01-05

© 2019 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 28.3.2024 from https://www.degruyter.com/document/doi/10.1515/ijeeps-2018-0215/html
Scroll to top button