Jump to ContentJump to Main Navigation
Show Summary Details

Journal of Electrical Engineering

The Journal of Slovak University of Technology

IMPACT FACTOR increased in 2015: 0.407
5-year IMPACT FACTOR: 0.498

SCImago Journal Rank (SJR) 2015: 0.231
Source Normalized Impact per Paper (SNIP) 2015: 0.505
Impact per Publication (IPP) 2015: 0.556

Open Access
See all formats and pricing

Select Volume and Issue


Implementation of DSP Based Cost Effective Inverter Fed Induction Motor Drive with VisSim

Nalin Mohanty1 / Ranganath Muthu1

EEE Department, Anna University, Chennai, Tamilnadu, India, EEE Dept, SRM University, Kattankulanthur, Tamilnadu, India1

EEE Department, SSN College of Engineering, Kalavakkam, Tamilnadu, India2

This content is open access.

Citation Information: Journal of Electrical Engineering. Volume 63, Issue 2, Pages 115–119, ISSN (Print) 1335-3632, DOI: https://doi.org/10.2478/v10187-012-0017-7, April 2012

Publication History

Published Online:

Implementation of DSP Based Cost Effective Inverter Fed Induction Motor Drive with VisSim

The implementation of a Digital Signal Processor (DSP) based high-performance cost effective fed Induction Motor drive with VisSim/Embedded Controls Developer (ECD) is presented in this paper. In the experimental work VisSim/ECD software automatically converts the in built block diagram to C code and compiles, links, and downloads the code to DSP processor TMS320F2812. The DSP processor generates the required PWM to a cost effective ie four switch 3-phase (FSTPI) inverter. The power circuit of FSTPI fed drive system consists of an IGBT based FSTPI bridge inverter module feeding to a 5 hp three-phase squirrel cage induction motor. In this work the speed of induction motor output is shown by the GUI of VisSim/ECD and SPWM pulses, line voltages and line current output curves are shown using digital storage oscilloscope to demonstrate the feasibility of the system.

Keywords: FSTPI; VisSim; SPWM; DSP

  • BOSE, B. K.: Power Electronics and Motor Drives, Advances and Trends, Elsevier Inc, UK, 2006.

  • BOSE, B. K.: Adjustable Speed AC Drive Systems, IEEE Press, New York, 1980.

  • JAEHONG KIM—JINSEOK HONG—KWANGHEE NAM: A Current Distortion Compensation Scheme for Four-Switch Inverters, IEEE Trans. Power Electronics 24 No. 4 (Apr 2009), 1032-1040. [Crossref]

  • MAURCIOBELTRAOde ROSSITER CORREA, M. B.—JACOBINA, C. B.: A General PWM Strategy for Four-Switch Three-Phase Inverters, IEEE Transactions on Power Electronics 21 No. 6 (Nov 2006), 1618-1627. [Crossref]

  • UDDIN, M. N.—RADWAN, T. S.—RAHMAN, M. A.: Fuzzy-Logic-Controller-Based Cost-Effective Four-Switch Three-Phase Inverter-Fed PM Synchronous Motor Drive System, IEEE Trans. Ind. Appl. 42 No. 1 (Jan/Feb 2006), 21-30.

  • LIN, C. T.—HUNG, C. W.—LIU, C. W.: Position Sensorless Control for Four- Switch Three-Phase Brushless DC Motor Drives, IEEE Trans. Power Electronics 23 No. 1 (Jan 2008), 438-444. [Crossref]

  • BLAABJERG, F.—NEACSU, D. O.—PEDERSEN, J. K.: Adaptive SVM to Compensate DC-Link Voltage Ripple for Four-Switch Three-Phase Voltage-Source Inverter, IEEE Trans. Power Electronics 14 No. 4 (July 1999), 743-752. [Crossref]

  • LEE, D. C.—KIM, Y. S.: Control of Single-Phase-to-Three-Phase AC/DC/AC PWM Converters for Induction Motor Drives, IEEE Transactions on Industrial Electronics 54 No. 2 (Apr 2007), 797-80. [Crossref]

  • http://www.vissim.us/products/vissim/embedded.htm

  • Texas Instruments, TMS320×281× DSP Event Manager (EV) Reference Guide, Literature Number: SPRU065D, 2006.

  • KUNG, Y. S.: Design and Implementation of a High-Performance PMLSM Drives Using DSP Chip, IEEE Transactions on Industrial Electronics 55 No. 3 (March 2008), 1341-1351. [Crossref]

Comments (0)

Please log in or register to comment.