Jump to ContentJump to Main Navigation
Show Summary Details
In This Section

Metrology and Measurement Systems

The Journal of Committee on Metrology and Scientific Instrumentation of Polish Academy of Sciences

4 Issues per year


IMPACT FACTOR 2016: 1.598

CiteScore 2016: 1.58

SCImago Journal Rank (SJR) 2015: 0.554
Source Normalized Impact per Paper (SNIP) 2015: 1.363

Open Access
Online
ISSN
2300-1941
See all formats and pricing
In This Section
Volume 17, Issue 1 (Jan 2010)

Holistic Qualification in Manufacturing Metrology by Enhancing Knowledge Exchange Among Different User Groups

Albert Weckenmann
  • Chair Quality Management and Manufacturing Metrology, University Erlangen-Nuremberg, Naegelsbachstrasse 25, D-91052 Erlangen, Germany
/ Teresa Werner
  • Chair Quality Management and Manufacturing Metrology, University Erlangen-Nuremberg, Naegelsbachstrasse 25, D-91052 Erlangen, Germany
Published Online: 2010-10-28 | DOI: https://doi.org/10.2478/v10178-010-0002-z

Holistic Qualification in Manufacturing Metrology by Enhancing Knowledge Exchange Among Different User Groups

To gather reproducible measurement results, metrologists need a variety of competences. Yet, also other groups of staff in a manufacturing enterprise need competences in metrology in order to assure the appropriate specification of tolerances or sufficient consideration of inspectional requirements in production processes.

Therefore, the strict focus of metrological qualification on staff preparing or performing the actual measurements is insufficient for the efficient assurance of conformity. Additionally, on the one hand a demand-oriented qualification concept is needed to impart required fundamental knowledge on manufacturing metrology according to the specific needs of each user group. On the other hand, appropriate measures of knowledge management have to be applied in order to assure a proper application of the gathered knowledge and enhance mutual understanding for the requirements of other involved user groups.

Thus, as amendment for user-specific measures of formal qualification, a concept has been developed to enable knowledge transfer among different groups and departments in an enterprise. By this holistic approach, the impact of measures of qualification can be increased and high product quality can be achieved as a common aim of all related groups of staff.

Keywords: advanced training; Life Long Learning; knowledge management; holistic qualification

  • Pfeifer, T. (2002). Production Metrology. Oldenbourg, München.

  • de Sousa, A. R., Gonzáles, R., Conejero, S. (2006) FORMA3D - An educational program for the qualification of technical person involved with coordinate metrology in Brazil. In Proceedings of IMEKO XVIII World Congress and IV Brazilian Congress of Metrology, Sept. 2006. Rio de Janeiro, Brazil, p. 10.

  • Weckenmann, A., Blunt, L., Beetz, S. (2005). European Training in Coordinate Metrology - Components of a training concept for Coordinate Metrology: Situation - Curriculum - Methodology - Training system - Experiences. impuls, 20.

  • Weckenmann, A., Werner, T. (2006). Training on Basics for Industrial Metrology by Integration of Work and Learning in the Project Mess-iN. In Proceedings of IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Rio de Janeiro, Brazil, 7.

  • Annemüller, F., Nehse, U., Ernst, D. (2005). Dynamic vision training module for i-Learning in industrial applications. In Proceedings of Joint International IMEKO TC1 + TC7 Symposium. Ilmenau, Germany, 111-114.

  • Weckenmann, A., Beetz, S. (2003). Computer-based integrated assistance for coordinate measurements". In Proceedings of XVII IMEKO World Congress. Dubrovnik, Croatia, 118.

  • Echeverría-Villagómez, S., Flores-Campos, M., Pantoja-Lesso, R., Rodríguez-Damián, N., Valganón-Argueta, B. (2006). Human resource and knowledge management system for competences in metrology using information technologies. In Proceedings of IMEKO XVIII World Congress and IV Brazilian Congress of Metrology. Rio de Janeiro, Brazil, 11.

  • Mischo, H. K., Pfeifer, T., Bitte, F. (2000). Model-based optimization of interferometers for testing aspherical surfaces. In Proceedings of SPIE 45th Annual Meeting. San Diego, 497-510.

  • Porter, M. (1985). Competitive Advantage: Creating and Sustaining Superior Performance. New York: Free Press.

  • Weckenmann, A., Werner, T. (2009). Development of user group specific training concepts for metrology in industrial application. In Proceedings of XIX IMEKO World Congress. Lisbon, Portugal, 4-9.

  • Bullinger, H. J., Wörner, K., Prieto, J. (1998). Wissensmanagement - Modelle und Strategien für die Praxis. Bürgel, H. D. (ed.): Wissensmanagement - Schritte zum intelligenten Unternehmen. Berlin: Springer. (in German)

About the article


Published Online: 2010-10-28

Published in Print: 2010-01-01



Citation Information: Metrology and Measurement Systems, ISSN (Print) 0860-8229, DOI: https://doi.org/10.2478/v10178-010-0002-z. Export Citation

This content is open access.

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
Slavenko M. Stojadinovic, Vidosav D. Majstorovic, Numan M. Durakbasa, and Tatjana V. Sibalija
Metrology and Measurement Systems, 2016, Volume 23, Number 1
[2]
Professor Vidosav Majstorovic and Dr Albert W, Albert Weckenmann, Goekhan Akkasoglu, and Teresa Werner
The TQM Journal, 2015, Volume 27, Number 3, Page 281

Comments (0)

Please log in or register to comment.
Log in