Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Pure and Applied Chemistry

The Scientific Journal of IUPAC

Ed. by Burrows, Hugh / Stohner, Jürgen


IMPACT FACTOR 2017: 5.294

CiteScore 2017: 3.42

SCImago Journal Rank (SJR) 2017: 1.212
Source Normalized Impact per Paper (SNIP) 2017: 1.546

Online
ISSN
1365-3075
See all formats and pricing
More options …
Volume 51, Issue 2

Issues

The photo-oxidation of polymers. A comparison with low molecular weight compounds

G. Geuskens / C. David
Published Online: 2009-01-01 | DOI: https://doi.org/10.1351/pac197951020233

References

  • 1

    2012, 11, 97, S. 2313DintchevaN.Tz., MoriciE., ArrigoR., La MantiaF.P., MalatestaV., SchwabJ.J., Polymer Degradation and Stability, Polymer Degradation and Stability, 01413910, UV-stabilisation of polystyrene-based nanocomposites provided by polyhedral oligomeric silsesquioxanes (POSS)Crossref

  • 2

    2012, 9-10, 54, S. 427TretinnikovO. N., PilipenkoV. V., PrikhodchenkoL. K., Polymer Science Series B, Polym. Sci. Ser. B, 1560-0904, Benzophenone-initiated grafting photopolymerization of acrylic acid on the surface of polyethylene from the monomer aqueous solution without its deaerationCrossref

  • 3

    2011, 2, 30, S. 173IlieS., SetnescuR., LungulescuE.M., MarinescuV., IlieD., SetnescuT., MareşG., Polymer Testing, Polym Testing, 01429418, Investigations of a mechanically failed cable insulation used in indoor conditionsCrossref

  • 4

    2008, 10, 93, S. 1723ItoMikiya, NagaiKazukiyo, Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Degradation issues of polymer materials used in railway fieldCrossref

  • 5

    2005, 1-3, 722, S. 147ZhengLiang-You, ChiuYing-Nan, LaiShan T., Journal of Molecular Structure: THEOCHEM, Journal of Molecular Structure: THEOCHEM, 01661280, Bipolaron model of room temperature superconductivity for oxidized polypropyleneCrossref

  • 6

    1996, 2, 51, S. 133GiroisS., AudouinL., DelpratP., VerduJ., Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Weight loss mechanism in the photooxidation of polypropyleneCrossref

  • 7

    1993, 5, 29, S. 731WeirNeil A., ArctJ., LeeJ.K., European Polymer Journal, Euro Poly J, 00143057, Co-photolysis of polystyrene hydroperoxide with poly(vinylacetophenone)Crossref

  • 8

    1993, 1, 60, S. 15MathurA.B., KumarVijai, MathurG.N., Thermochimica Acta, Thermochimica, 00406031, Evaluation of photodegradability of low density polyethylene by thermoanalytical techniqueCrossref

  • 9

    1993, 1, 41, S. 37WeirN.A., CeccarelliA., Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Photodecomposition of polystyrene hydroperoxide: Part I—Reactions in dilute solutionCrossref

  • 10

    1993, 1, 41, S. 93WeirN.A., CeccarelliA., Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Photo-decomposition of poly(styrene) hydroperoxide—II: Reactions in the solid stateCrossref

  • 11

    1989, 7, 35, S. 2135KamińskaA., SanyalS., KaczmarekH., Journal of Thermal Analysis, J Thermal Anal, 15728943, Thermal and photochemical stability of polystyrene and its blends with polyvinyl chlorideCrossref

  • 12

    1989, 1, 25, S. 31SchopovI., KassabovaN., KossmehlG., Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Oxidation of cis-1,4-polybutadiene by singlet oxygenCrossref

  • 13

    1987, 5, 23, S. 367BousquetJ.A., FouassierJ.P., European Polymer Journal, Euro Poly J, 00143057, Photo-oxidation of a random styrene-butadiene copolymer: Role of hydroperoxides and behaviour of butenyl segmentsCrossref

  • 14

    1986, 4, 14, S. 341GalloRaffaele, IpsaleSalvatore, Del FantiNatalino, SeveriniFebo, Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Environmental degradation of stabilized LDPE. Initial stepCrossref

  • 15

    1985, 1, 21, S. 15RodriguesM.A., De PaoliM.-A., European Polymer Journal, Euro Poly J, 00143057, The chemical effects of photo-oxidation on isoprene rubberCrossref

  • 16

    1984, 4, 110, S. 433IngoldK.U., JohnstonL.J., LusztykJ., ScaianoJ.C., Chemical Physics Letters, chem phys letts, 00092614, Triplet quenching by diacyl peroxidesCrossref

  • 17

    1983, 9, 19, S. 761De PaoliM.-A., European Polymer Journal, Euro Poly J, 00143057, The chemical effects of photo-oxidation on butadiene rubberCrossref

  • 18

    1983, 7, 19, S. 551AllenN.S., FatinikunK.O., HenmanT.J., European Polymer Journal, Euro Poly J, 00143057, Thermal and photochemical oxidation of polypropylene. Influence of residual catalyst levels in unstabilised diluent and gas phase polymersCrossref

  • 19

    1982, 1, 18, S. 81RabekJ.F., RanbyB., ArctJ., GolubskiZ., European Polymer Journal, Euro Poly J, 00143057, Metal salts of 2-[(1-hydroxy-2-naphthalenyl)carbonyl]-benzoic acid as a new class of photostabilizersCrossref

  • 20

    1982, 4, 18, S. 307GeuskensG., Lu-VinhQ., European Polymer Journal, Euro Poly J, 00143057, Photo-oxidation of polymers—VIICrossref

  • 21

    1982, 1, 23, S. 54MathurAjit B., MathurG.N., Polymer, Poly, 00323861, Thermo-oxidative degradation of isotactic polypropylene film: Structural changes and its correlation with propertiesCrossref

  • 22

    1982, 10, 23, S. 1457ChandraR., SubhashV., VermaA.K., Polymer, Poly, 00323861, Changes in physical properties and molecular structure of butyl rubber during γ-irradiationCrossref

  • 23

    1980, 1, 3, S. 61WilesD.M., CarlssonD.J., Polymer Degradation and Stability, Polym Deg Stabil, 01413910, Photostabilisation mechanisms in polymers: A reviewCrossref

About the article

Published Online: 2009-01-01

Published in Print: 1979-01-01


Citation Information: Pure and Applied Chemistry, Volume 51, Issue 2, Pages 233–240, ISSN (Online) 1365-3075, ISSN (Print) 0033-4545, DOI: https://doi.org/10.1351/pac197951020233.

Export Citation

© 2013 Walter de Gruyter GmbH, Berlin/Boston.Get Permission

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
Marco -A. De Paoli and Gerhard W. Schultz
Polymer Bulletin, 1982, Volume 8, Number 9-10, Page 437
[2]
Marta Anghelone, Valentin Stoytschew, Dubravka Jembrih-Simbürger, and Manfred Schreiner
Microchemical Journal, 2018, Volume 139, Page 155
[3]
Samir N. Lawandy, Hesham Moustafa, Magdy A. H. Zahran, and Marwa Rabee
Journal of Adhesion Science and Technology, 2017, Page 1
[4]
Andreas Eich, Tobias Mildenberger, Christian Laforsch, Miriam Weber, and Dee A. Carter
PLOS ONE, 2015, Volume 10, Number 9, Page e0137201
[5]
D. El-Sayed, A.A. El-Saftawy, S.A. Abd El Aal, M. Fayez-Hassan, M. Al-Abyad, N.A. Mansour, and U. Seddik
Radiation Physics and Chemistry, 2017, Volume 133, Page 9
[6]
Marta Anghelone, Dubravka Jembrih-Simbürger, and Manfred Schreiner
Polymer Degradation and Stability, 2016, Volume 134, Page 157
[7]
John W. Bridge, Kristofer S. Weisshaupt, Robert M. Fisher, Kaleb M. Dempsey, and Michael L. Peterson
Sports Engineering, 2017, Volume 20, Number 1, Page 41
[8]
Cathryn L. Haigh and Simon C. Drew
Biochemical and Biophysical Research Communications, 2015, Volume 461, Number 3, Page 494
[9]
O. N. Tretinnikov, V. V. Pilipenko, and L. K. Prikhodchenko
Polymer Science Series B, 2012, Volume 54, Number 9-10, Page 427
[10]
N.Tz. Dintcheva, E. Morici, R. Arrigo, F.P. La Mantia, V. Malatesta, and J.J. Schwab
Polymer Degradation and Stability, 2012, Volume 97, Number 11, Page 2313
[11]
Liang-You Zheng, Ying-Nan Chiu, and Shan T. Lai
Journal of Molecular Structure: THEOCHEM, 2005, Volume 722, Number 1-3, Page 147
[12]
G. Geuskens, F. Debie, M.S. Kabamba, and G. Nedelkos
Polymer Photochemistry, 1984, Volume 5, Number 1-6, Page 313
[13]
S. Ilie, R. Setnescu, E.M. Lungulescu, V. Marinescu, D. Ilie, T. Setnescu, and G. Mareş
Polymer Testing, 2011, Volume 30, Number 2, Page 173
[14]
A.B. Mathur, Vijai Kumar, and G.N. Mathur
Thermochimica Acta, 1993, Volume 60, Number 1, Page 15
[15]
S. Girois, L. Audouin, P. Delprat, and J. Verdu
Polymer Degradation and Stability, 1996, Volume 51, Number 2, Page 133
[16]
N.A. Weir and A. Ceccarelli
Polymer Degradation and Stability, 1993, Volume 41, Number 1, Page 93
[17]
Mikiya Ito and Kazukiyo Nagai
Polymer Degradation and Stability, 2008, Volume 93, Number 10, Page 1723
[18]
I. Schopov, N. Kassabova, and G. Kossmehl
Polymer Degradation and Stability, 1989, Volume 25, Number 1, Page 31
[19]
N.A. Weir and A. Ceccarelli
Polymer Degradation and Stability, 1993, Volume 41, Number 1, Page 37
[20]
Febo Severini, Raffaele Gallo, Salvatore Ipsale, and Natalino Del Fanti
Polymer Degradation and Stability, 1986, Volume 14, Number 4, Page 341
[21]
D.M. Wiles and D.J. Carlsson
Polymer Degradation and Stability, 1980, Volume 3, Number 1, Page 61
[22]
G. Geuskens and Q. Lu-Vinh
European Polymer Journal, 1982, Volume 18, Number 4, Page 307
[23]
J.A. Bousquet and J.P. Fouassier
European Polymer Journal, 1987, Volume 23, Number 5, Page 367
[24]
[25]
M.-A. De Paoli
European Polymer Journal, 1983, Volume 19, Number 9, Page 761
[26]
M.A. Rodrigues and M.-A. De Paoli
European Polymer Journal, 1985, Volume 21, Number 1, Page 15
[27]
Neil A. Weir, J. Arct, and J.K. Lee
European Polymer Journal, 1993, Volume 29, Number 5, Page 731
[28]
J.F. Rabek, B. Ranby, J. Arct, and Z. Golubski
European Polymer Journal, 1982, Volume 18, Number 1, Page 81
[29]
R. Chandra, V. Subhash, and A.K. Verma
Polymer, 1982, Volume 23, Number 10, Page 1457
[31]
A. Kamińska, S. Sanyal, and H. Kaczmarek
Journal of Thermal Analysis, 1989, Volume 35, Number 7, Page 2135

Comments (0)

Please log in or register to comment.
Log in