Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Journal of Polymer Engineering

Editor-in-Chief: Grizzuti, Nino


IMPACT FACTOR 2017: 0.778

CiteScore 2017: 0.77

SCImago Journal Rank (SJR) 2017: 0.244
Source Normalized Impact per Paper (SNIP) 2017: 0.551

Online
ISSN
2191-0340
See all formats and pricing
More options …
Volume 37, Issue 1

Issues

Tailoring PES membrane morphology and properties via selected preparation parameters

Lassaad Gzara
  • Center of Excellence in Desalination Technology, King Abdulaziz University, PO Box 80200, Jeddah 21589, Saudi Arabia
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Zulfiqar Ahmad Rehan
  • Center of Excellence in Desalination Technology, King Abdulaziz University, PO Box 80200, Jeddah 21589, Saudi Arabia
  • Chemistry Department, Faculty of Science, King Abdulaziz University, PO Box 80203, Jeddah 21589, Saudi Arabia
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Silvia Simone / Francesco Galiano / Naser Tavajohi Hassankiadeh
  • WCU Department of Energy Engineering, College of Engineering, Hanyang University, Seoul 133-791, Republic of Korea
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Sharaf Faisal Al-Sharif
  • Center of Excellence in Desalination Technology, King Abdulaziz University, PO Box 80200, Jeddah 21589, Saudi Arabia
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Alberto Figoli / Enrico Drioli
  • Corresponding author
  • Institute on Membrane Technology (ITM-CNR), Via P. Bucci 17/C, I-87030 Rende, CS, Italy
  • WCU Department of Energy Engineering, College of Engineering, Hanyang University, Seoul 133-791, Republic of Korea
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2016-05-12 | DOI: https://doi.org/10.1515/polyeng-2015-0419

Abstract

Polyethersulfone (PES) is among the most interesting materials for membranes preparation, thanks to its outstanding properties, coupled to compatibility with several additives and the facility to be solubilized in several solvents. In this work, flat sheet membranes were prepared by the non-solvent induced phase separation (NIPS) technique, using PES as polymer and polyvinyl pyrrolidone (PVP, 10 kDa) as additive. Preparation and casting conditions were varied and membranes with tailored morphology and properties were obtained. The main objective was to investigate the relationship between selected preparation conditions and membrane features. This may help to understand how to tailor membrane morphology and properties depending on the desired application.

Keywords: casting conditions; membrane casting conditions; membrane preparation; membrane process parameters; polyethersulfone membranes

References

  • [1]

    Anonymous, Processing Guide for Polymer Membranes, SOLVAY SPECIALTY POLYMERS (from www.solvay.com), Access date of 28th December 2015.

  • [2]

    Machado PST, Habert AC, Li CL. J. Membr. Sci. 1999, 155, 171–183.Google Scholar

  • [3]

    Munari S, Bottino A, Capannelli G. Desalination 1988, 70, 265–275.Google Scholar

  • [4]

    Tsai HA, Li LD, Lee KR, Wang YC, Li CL, Huang J, Lai JY. J. Membr. Sci., 2000, 176, 97–103.Google Scholar

  • [5]

    Ahmad AL, Sarif M, Ismail S. Desalination 2005, 179, 257–263.Google Scholar

  • [6]

    Hołda AK, Aernouts B, Saeys W, Vankelecom IFJ. J. Membr. Sci. 2013, 442, 196–205.Google Scholar

  • [7]

    Madaeni SS, Rahimpour A. Polym. Adv. Technol., 2005, 16, 717–724.Google Scholar

  • [8]

    Idris A, Zain NM, Noordin MY. Desalination 2007, 207, 324–339.Google Scholar

  • [9]

    Li JF, Xu ZL, Yang H. Polym. Adv. Technol. 2007, 19, 251–257.Google Scholar

  • [10]

    Rahimpour A, Madaeni SS. J. Membr. Sci. 2007, 305, 299–312.Google Scholar

  • [11]

    Rahimpour A, Madaeni SS, Mansourpanah Y. Polym. Adv. Technol. 2007, 18, 403–410.Google Scholar

  • [12]

    Darvishmanesh S, Tasselli F, Jansen JC, Tocci E, Bazzarelli F, Bernardo P, Luis P, Degrève J, Drioli E, Van der Bruggen B. J. Membr. Sci. 2011, 384, 89–96.Google Scholar

  • [13]

    Guillen GR, Pan Y, Li M, Hoek EMV. Ind. Eng. Chem. Res. 2011, 50, 3798–3817.Google Scholar

  • [14]

    Fane AG, Tang CY, Wang R. In Treatise on Water Science, Wilderer, P, Ed., Academic Press: Oxford, 2011, p 301.Google Scholar

  • [15]

    Girard B, Fukumoto LR. Crit. Rev. Biotechnol. 2000, 20, 109–175.Google Scholar

  • [16]

    El Rayessa Y, Albasi C, Bacchin P, Taillandier P, Raynal J, Mietton-Peuchot M, Devatine A. J. Membr. Sci. 2011, 382, 1–19.Google Scholar

  • [17]

    Cassano A, Conidi C, Timpone R, D’Avella M, Drioli E. J. Food Eng. 2007, 80, 914–921.Google Scholar

  • [18]

    Cassano A, Conidi C, Drioli E. J. Food Eng. 2011, 107, 366–373.Google Scholar

  • [19]

    Ulbricht M, Ansorge W, Danielzik I, König M, Schuster O. Sep. Purif. Technol. 2009, 68, 335–342.Google Scholar

  • [20]

    Ji-xiang Y, Wen-xin S, Shui-li Y, Yan L. Desalination 2009, 239, 29–37.Google Scholar

  • [21]

    Hilal N, Ogunbiyi OO, Miles NJ, Nigmatullin R. Sep. Sci. Technol. 2005, 40, 1957–2005.Google Scholar

  • [22]

    Susanto H, Stahra N, Ulbricht M. J. Membr. Sci. 2009, 342, 153–164.Google Scholar

  • [23]

    Susanto H, Ulbricht M. J. Membr. Sci. 2009, 327, 125–135.Google Scholar

  • [24]

    Susanto H, Arafat H, Janssen EML, Ulbricht M. Sep. Purif. Technol. 2008, 63, 558–565.Google Scholar

  • [25]

    Han MJ, Nam ST. J. Membr. Sci. 2002, 202, 55–61.Google Scholar

  • [26]

    Chakrabarty B, Ghoshal AK, Purkait AK. J. Membr. Sci. 2008, 315, 36–47.Google Scholar

  • [27]

    Yoo SH, Kim JH, Jho JY, Won J, Kang YS, J. Membr. Sci. 2004, 236, 203–207.Google Scholar

  • [28]

    Figoli A, Simone S, Drioli E. In Membrane Fabrication, Hilal, N, Ismail, AF, Wright, C, Eds., Print ISBN- 978-1-4822-1045-3, CRC Press, Taylor & Francis Group: Boca Raton, FL, 2015, Chapter 1, p 3.Google Scholar

  • [29]

    Simone S, Figoli A, Criscuoli A, Carnevale MC, Alfadul S, Al-Romaih H, Al Shabouna F, Al-Harbi OA, Drioli E. Desalination 2014, 344, 28–35.Google Scholar

  • [30]

    Figoli A, Simone S, Criscuoli A, AL-Jlil SA, Al Shabouna FS, Al-Romaih HS, Di Nicolò E, Al-Harbi OA, Drioli E. Polymer 2014, 55, 1296–1306.Google Scholar

  • [31]

    Drioli E, Ali A, Simone S, Macedonio F, AL-Jlil SA, Al Shabonah FS, Al-Romaih HS, Al-Harbi O, Figoli A, Criscuoli A Sepif. Purif. Technol. 2013, 115, 27–38.Google Scholar

  • [32]

    Andrade, JD, Smith, LM, Gregonis, DE, The Contact Angle And Interface Energetics, Surfaces And Interfacial Aspects Of Biomedical Polymers. Plenum Press: New York, 1985.Google Scholar

  • [33]

    Hiemenz PC. Principle of Colloid and Surface Chemistry. 2nd ed., Dekker, New York, 1986.Google Scholar

  • [34]

    Chen JD, Wada N. J. Coll. Int. Sci. 1992, 148, 207–222.Google Scholar

  • [35]

    Tasselli F, Jansen JC, Drioli E. J. Appl. Polym. Sci. 2004, 91, 841–853.Google Scholar

  • [36]

    Smolders CA, Reuvers AJ, Boom RM, Wienk IM. J. Membr. Sci. 1992, 73, 259–275.Google Scholar

  • [37]

    Lee K-W, Se B-K, Nam S-T, Han M-J. Desalination 2003, 159, 289–296.Google Scholar

  • [38]

    Paulsen FG, Shojaie SS, Krantz WB. J. Membr. Sci. 1994, 91, 265–282.Google Scholar

  • [39]

    Park HC, Kim YP, Kim HY, Kang YS. J. Membr. Sci. 1999, 156, 169–178.Google Scholar

  • [40]

    Guillen GR, Ramon GZ, Pirouz Kavehpour H, Kaner RB, Hoek EMV. J. Membr. Sci. 2013, 431, 212–220.Google Scholar

  • [41]

    Sukitpaneenit P, Chung TS. J. Membr. Sci. 2009, 340, 192–205.Google Scholar

  • [42]

    Wenzel RN. Ind. Eng. Chem. 1936, 28, 988–994.Google Scholar

About the article

Received: 2015-09-28

Accepted: 2016-03-10

Published Online: 2016-05-12

Published in Print: 2017-01-01


Citation Information: Journal of Polymer Engineering, Volume 37, Issue 1, Pages 69–81, ISSN (Online) 2191-0340, ISSN (Print) 0334-6447, DOI: https://doi.org/10.1515/polyeng-2015-0419.

Export Citation

©2017 Walter de Gruyter GmbH, Berlin/Boston.Get Permission

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
Tiziana Marino, Francesco Galiano, Silvia Simone, and Alberto Figoli
Environmental Science and Pollution Research, 2018

Comments (0)

Please log in or register to comment.
Log in