Jump to ContentJump to Main Navigation
Show Summary Details
More options …

Reviews in Chemical Engineering

Editor-in-Chief: Luss, Dan / Brauner, Neima

Editorial Board: Agar, David / Davis, Mark E. / Edgar, Thomas F. / Giorno, Lidietta / Joshi, J. B. / Khinast, Johannes / Kost, Joseph / Leal, L. Gary / Li, Jinghai / Mills, Patrick / Morbidelli, Massimo / Ng, Ka Ming / Schouten, Jaap C. / Schroeder, Avi / Seinfeld, John / Stitt, E. Hugh / Tronconi, Enrico / Vayenas, Constantinos G. / Zagoruiko, Andrey / Zondervan, Edwin


IMPACT FACTOR 2018: 4.200

CiteScore 2018: 4.96

SCImago Journal Rank (SJR) 2018: 1.016
Source Normalized Impact per Paper (SNIP) 2018: 1.572

Online
ISSN
2191-0235
See all formats and pricing
More options …
Volume 30, Issue 4

Issues

An overview on the role of wheat gluten as a viable substitute for biodegradable plastics

Neha Patni
  • Corresponding author
  • Department of Chemical Engineering, Institute of Technology, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
  • Email
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Pujita Yadava
  • Department of Chemical Engineering, Institute of Technology, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Anisha Agarwal
  • Department of Chemical Engineering, Institute of Technology, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
/ Vyoma Maroo
  • Department of Chemical Engineering, Institute of Technology, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
  • Other articles by this author:
  • De Gruyter OnlineGoogle Scholar
Published Online: 2014-04-26 | DOI: https://doi.org/10.1515/revce-2013-0039

Abstract

Petroleum resources are limited and stringent environmental concerns are increasing; biodegradable materials made from renewable agricultural resources such as carbohydrates, starch and proteins are attracting much attention for sustainable development and environmental conservation. As per the annual production of wheat in India, it is the second largest producer in the world after China. In this paper, we explore the possibility of wheat protein known as gluten as a promising substitute for petroleum-based plastics and environment-friendly thermosetting composites. Plant proteins from wheat show an advantage for use as films and plastics because of their abundant resources, low cost, good biodegradability and suitable properties like rheological properties, water sensitivity, sound absorption and thermal behavior. The paper aims to explain the extraction of gluten and to review the blending of gluten with different plasticizers such as glycerol, water and some cross-linking agents to enhance the above-mentioned properties. An extensive review of the existing literature reveals that wheat gluten (WG)-based bioplastics are nontoxic and fully biodegradable, whatever the technological process is applied; thus, the paper also discusses the biodegradability of WG-based bioplastics. We conclude the paper by incorporating a critical summary of the various parameters and chemicals used to enhance the properties of gluten-based composites.

Keywords: biodegradable; biopolymer; glycerol; plastic; wheat gluten

References

  • Angellier-Coussy H, Gastaldi E, Gontard N, Guillard V. Influence of processing temperature on the water vapour transport properties of wheat gluten based agromaterials. Ind Crops Prod 2011; 33: 457–461.CrossrefGoogle Scholar

  • Anker CA, Foster GA, Loader MA. Method of preparing gluten containing films and coatings. U.S. Patent No. 3,653,925, 1972.Google Scholar

  • Attenburrow G, Barnes DJ, Davies AP, Ingman SJ. Rheological properties of wheat gluten. J Cereal Sci 1990; 12: 1–14.CrossrefGoogle Scholar

  • Aydt TP, Weller CL, Testin RF. Mechanical and barrier properties of edible com and wheat protein films. Trans ASAE 1991; 34: 207–211.CrossrefGoogle Scholar

  • Cherian G, Gennadios A, Weller C, Chinachoti P. Thermomechanical behavior of wheat gluten films: effect of sucrose, glycerin, and sorbitol. Cereal Chem 1995; 72: 1–6.Google Scholar

  • Cuq B, Boutrot F, Redl A, Lullien PV. Study of the temperature effect on the formation of wheat gluten network: influence on mechanical properties and protein solubility. J Agric Food Chem 2000; 48: 2954–2959.CrossrefPubMedGoogle Scholar

  • Domenek S, Feuilloley P, Gratraud J, Morel MH, Guilbert S. Biodegradability of wheat gluten based bioplastics. Chemosphere 2004; 54: 551–559.CrossrefPubMedGoogle Scholar

  • Dong J. Aqueous electrospinning of wheat gluten fibers with thiolated additives. Polymer 2010; 51: 3164–3172.CrossrefGoogle Scholar

  • Gennadios A, Weller CI, Testin RF. Property modification of edible wheat, gluten-based films. Trans ASAE 1993; 36: 465–470.CrossrefGoogle Scholar

  • Georgopoulos T, Larsson H, Eliasson AC. A comparison of the rheological properties of wheat flour dough and its gluten prepared by ultracentrifugation. Food Hydrocolloids 2004; 18: 143–151.CrossrefGoogle Scholar

  • Gioia L, Guilbert S. Corn protein-based thermoplastic resins: effect of some polar and amphiphilic plasticizers. J Agric Food Chem 1999; 47: 1254–1261.CrossrefPubMedGoogle Scholar

  • Gontard N, Guilbert S, Cuq JL. Water and glycerol as plasticizers affect mechanical and water vapor barrier properties of an edible wheat gluten film. J Food Sci 1993; 58: 206–211.CrossrefGoogle Scholar

  • Grevellec J, Marquie C, Ferry L, Crespy A, Vialettes V. Processability of cottonseed proteins into biodegradable materials. Biomacromolecules 2001; 2: 1104–1109.PubMedCrossrefGoogle Scholar

  • Grosskreutz JC. A lipoprotein model of WG structure. Cereal Chem 1961; 38: 336–348.Google Scholar

  • Gutfreund K, Yamauchi T. Potentially useful products derived from gluten hydrolyzate. In: Fellers CM, editor. Proceedings of the 8th National Conference on Wheat Utilization Research. Albany, CA: USDA, 1974: 32–38.Google Scholar

  • Hemsri S, Asandei AD, Grieco K, Parnas SR. Biopolymer composites of wheat gluten with silica and alumina. Composites Part A 2011; 42: 1764–1773.CrossrefGoogle Scholar

  • Hernandez-Munoz P, Kanavouras A, Lagaron JM, Gavara R. Development and characterization of films based on chemically cross-linked gliadins. J Agric Food Chem 2005; 53: 8216–8223.CrossrefGoogle Scholar

  • Huang A, Netravali A. Biodegradable green composites made using bamboo micro/nano-fibrils and chemically modified soy protein resin. Compos Sci Technol 2009; 69: 1009–1015.CrossrefGoogle Scholar

  • Irissin MJ, Bauduin G, Boutevin B, Gontard N. New plasticizers for wheat gluten films. Eur Polym J 2001; 37: 1533–1541.CrossrefGoogle Scholar

  • Jerez A, Partal P, Martinez I, Gallegos C, Guerrero A. Rheology and processing of gluten based bioplastics. Biochem Eng J 2005; 26: 131–138.CrossrefGoogle Scholar

  • Jerez A, Partal P, Martinez I, Gallegos C, Guerrero A. Protein-based bioplastics: effect of thermo-mechanical processing. Rheol Acta 2007; 46(5): 711–720.CrossrefGoogle Scholar

  • John J, Tang J, Bhattacharya M. Processing of biodegradable blends of wheat gluten and modified polycaprolactone. Polymer 1998; 39: 2883–2895.CrossrefGoogle Scholar

  • Kalichevsky MT, Jaroszkiewicz EM, Blanshard JMV. Glass transition of gluten. 1: Gluten and gluten-sugar mixtures. Int J Biol Macromol 1992; 14: 257–266.PubMedGoogle Scholar

  • Kayserilioğlu SB, Bakir U, Yilmaz L, Akkaş N. Use of xylan, an agricultural by-product, in wheat gluten based biodegradable films: mechanical, solubility and water vapor transfer rate properties. Bioresour Technol 2003; 87: 239–246.CrossrefPubMedGoogle Scholar

  • Kokini JL, Cocero AM, Madeka H, Degraaf E. The development of state diagrams for cereal proteins. Trends Food Sci Technol 1994; 5: 281–288.CrossrefGoogle Scholar

  • Krull LH, Inglett GE. Industrial uses of gluten. Cereal Sci Today 1971; 16: 232–236, 261.Google Scholar

  • Kunanopparat T, Menut P, Morel MH, Guilbert S. Reinforcement of plasticized wheat gluten with natural fibers: from mechanical improvement to deplasticizing effect. Composites Part A 2008; 39: 777–785.CrossrefGoogle Scholar

  • Lagrain B, Goderis B, Brijs K, Delcour JA. Molecular basis of processing wheat gluten toward biobased materials. Biomacromolecules 2010; 11: 533–541.CrossrefPubMedGoogle Scholar

  • Leray D, Oliete B, Mezaize S, Chevallier S, Lamballerie M. Effects of freezing and frozen storage conditions on the rheological properties of different formulations of non-yeasted wheat and gluten-free bread dough. J Food Eng 2010; 100: 70–76.CrossrefGoogle Scholar

  • Lodha P, Netravali AN. Thermal and mechanical properties of environment-friendly ‘green’ plastics from stearic acid modified-soy protein isolate. Ind Crops Prod 2005; 21: 49–64.CrossrefGoogle Scholar

  • MacRitchie F. Studies of the methodology for fractionation and reconstitution of wheat flours. J Cereal Sci 1985; 3: 221–230.CrossrefGoogle Scholar

  • Mangavel C, Barbot J, Bervas E, Linossier L, Feys M, Gueguen J, Popineau Y. Influence of prolamin composition on the mechanical properties of cast wheat gluten films. J Cereal Sci 2002; 36: 157–166.CrossrefGoogle Scholar

  • Mangavel C, Rossignol N, Perronnet A, Barbot J, Popineau Y, Gueguen J. Properties and microstructure of thermo-pressed wheat gluten films: a comparison with cast films. Biomacromolecules 2004; 5: 1596–1601.PubMedCrossrefGoogle Scholar

  • Matveev YI, Grinberg VY, Tolstoguzov VB. The plasticizing effect of water on proteins, polysaccharides and their mixtures. Glassy state of biopolymers, food and seeds. Food Hydrocolloids 2000; 14: 425–437.CrossrefGoogle Scholar

  • Micard V, Guilbert S. Thermal behavior of native and hydrophobized wheat gluten, gliadin and glutenin-rich fractions by modulated DSC. Int J Biol Macromol 2000; 27: 229–236.PubMedCrossrefGoogle Scholar

  • Mohamed AA, Gordon SH, Carriere CJ, Kim S. Thermal characteristics of polylactic acid/wheat gluten blends. J Food Qual 2006; 29: 266–281.CrossrefGoogle Scholar

  • Okamoto S. Factors affecting protein film formation. Cereal Foods World 1978; 23: 256–262.Google Scholar

  • Pallos M, Robertson GH, Pavlath AE, Orts WJ. Thermoformed wheat gluten biopolymers. J Agric Food Chem 2006; 54: 349–352.PubMedCrossrefGoogle Scholar

  • Payne PI, Corfield KG. Subunits composition of wheat glutenin proteins isolated by gel filtration in a dissociating medium. Planta 1979; 14: 83–88.CrossrefGoogle Scholar

  • Pommet M, Redl A, Guilbert S, Morel MH. Intrinsic influence of various plasticizers on functional properties and reactivity of wheat gluten thermoplastic materials. J Cereal Sci 2005; 42: 81–91.CrossrefGoogle Scholar

  • Pouplin M, Redl A, Gontard N. Glass transition of wheat gluten plasticized with water, glycerol, or sorbitol. J Agric Food Chem 1999; 47: 538–543.CrossrefPubMedGoogle Scholar

  • Reddy N, Yang Y. Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement. Polym Int 2011; 60(4): 711–716.CrossrefGoogle Scholar

  • Romero-Bastida CA, Flores-Huicochea E, Martin-Polo MO, Velazquez G, Torres JA. Compositional and moisture content effects on the biodegradability of zein/ethylcellulose films. J Agric Food Chem 2004; 52: 2230–2235.CrossrefGoogle Scholar

  • Sanchez AC, Popineau Y, Mangavel C, Larre C, Gueguen J. Effect of different plasticizers on the mechanical and surface properties of wheat gliadin films. J Agric Food Chem 1998; 46: 4539– 4544.CrossrefGoogle Scholar

  • Shewry PR, Tatham AS. Disulphide bonds in wheat gluten proteins. J Cereal Sci 1997; 25: 207–227.CrossrefGoogle Scholar

  • Shewry PR, Tatham AS, Forde J, Kreis M, Miflin BJ. The classification and nomenclature of wheat gluten proteins: a reassessment. J Cereal Sci 1986; 4: 97–106.CrossrefGoogle Scholar

  • Shewry PR, Halford NG, Belton PS, Tatham AS. The structure and properties of gluten: an elastic protein from wheat grain. Philos Trans R Soc Lond B Biol Sci 2002; 357: 133–142.CrossrefGoogle Scholar

  • Singh H, MacRitchie F. Application of polymer science to properties of gluten. J Cereal Sci 2001; 33: 231–243.CrossrefGoogle Scholar

  • Siracusa V, Rocculi P, Romani S, Dalla Rosa M. Biodegradable polymers for food packaging: a review. Trends Food Sci Technol 2008; 19: 634–643.CrossrefGoogle Scholar

  • Song YH, Zheng Q. Improved tensile strength of glycerol-plasticized gluten bioplastic containing hydrophobic liquids. Bioresour Technol 2008; 99: 7665–7671.PubMedCrossrefGoogle Scholar

  • Song YH, Zheng Q, Lai ZZ. Properties of thermo-molded gluten/glycerol/silica composites. Chin J Polym Sci 2008; 26: 631–638.CrossrefGoogle Scholar

  • Song YH, Yang Y, Zhang KZ, Zheng Q. Preparation and properties of wheat gluten/rice protein composites plasticized with glycerol. Chin J Polym Sci 2011; 29: 87–92.Google Scholar

  • Sun S, Song Y, Zheng Q. Morphologies and properties of thermo-molded biodegradable plastics based on glycerol-plasticized wheat gluten. Food Hydrocolloids 2007; 21: 1005–1013.CrossrefGoogle Scholar

  • Sun Y, Song Y, Zheng Q. Thermo-molded wheat gluten plastics plasticized with glycerol: effect of molding temperature. Food Hydrocolloids 2008; 22: 1006–1013.CrossrefGoogle Scholar

  • Toufeili I, Lambert IA, Kokini JL. Effect of glass transition and cross-linking on rheological properties of gluten: development of a preliminary state diagram. Cereal Chem 2002; 79: 138–142.CrossrefGoogle Scholar

  • Tropini V, Lens JP, Mulder WJ, Silvestre F. Wheat gluten films cross-linked with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide. Ind Crops Prod 2004; 20: 281–289.Google Scholar

  • Ullsten HN, Mikael G, Johansson E, Graslund A, Hedenqvist M. Enlarged processing window of plasticized wheat gluten using salicylic acid. Biomacromolecules 2006; 7: 771–776.PubMedCrossrefGoogle Scholar

  • Verbeek CJR, van den Berg LE. Recent developments in thermo-mechanical processing of proteinous bioplastics. Recent Pat Mater Sci 2009; 2: 171–189.Google Scholar

  • Wall JS, Beckwith AC. Relationship between structure and rheological properties of gluten proteins. Cereal Sci Today 1969; 14: 16–21.Google Scholar

  • Weegels PL, Verhoek JA, Degroot AMG, Hamer RJ. Effects on gluten of heating at different moisture contents. 1. Changes in functional-properties. J Cereal Sci 1994; 19: 31–38.CrossrefGoogle Scholar

  • Wieser H. The use of redox agents. In: Cauvain SP, editor. Breadmaking: improving quality. Cambridge, UK: Woodhead Publishing Limited, 2003: 424–446.Google Scholar

  • Wieser H, Bushuk W, MacRitchie F. The polymer structure of glutenin. In: Wrigley C, Bekes F, Bushuk W, editors. Gliadin and glutenin: the unique balance of wheat quality. St. Paul, MN: AACC International, 2006: 213–240.Google Scholar

  • Yuan Q, Lu W, Pan Y. Structure and properties of biodegradable wheat gluten/attapulgite nanocomposite sheets. Polym Degrad Stabil 2010; 95: 1581–1587.CrossrefGoogle Scholar

  • Yue HB, Cui YD, Shuttleworth PS, Clark JH. Preparation and characterisation of bioplastics made from cottonseed protein. Green Chem 2012; 14: 2009–2016.CrossrefGoogle Scholar

  • Zarate-Ramirez LS, Martínez I, Romero A, Partal P, Guerrero A. Wheat gluten-based materials plasticised with glycerol and water by thermoplastic mixing and thermomoulding. J Sci Food Agric 2011; 91: 625–633.CrossrefGoogle Scholar

  • Zarate-Ramirez LS, Romero A, Martínez I, Bengoechea C, Partal P, Guerrero A. Effect of aldehydes on thermomechanical properties of gluten-based bioplastics. Food Bioprod Process 2013; 92: 20–29.Google Scholar

  • Zou Y, Huda S, Yang Y. Lightweight composites from long wheat straw and polypropylene web. Bioresour Technol 2010; 101: 2026–2033.PubMedCrossrefGoogle Scholar

About the article

Neha Patni

Neha Patni (center left) obtained a MPhil (Energy) from Non Conventional Energy Centre and a MSc (Chemistry) from University of Rajasthan and is currently pursuing her PhD at Nirma University. She has been working as an Assistant Professor at the Chemical Engineering Department, Institute of Technology, Nirma University, Ahmedabad, since 2008. She is an author of two books published internationally. She also has to her credit many papers published in international journals or presented at conferences. Her areas of interest are biofuels, chemical sensors, nanoscience, and polymer chemistry. She is a life member of the Chemical Research Society of India (CRSI) and the Indian Society for Technical Education (ISTE). Pujita Yadava (left), Vyoma Maroo (center right), and Anisha Agarwal (right) are pursuing their BTech in Chemical Engineering at the Institute of Technology, Nirma University, India.


Corresponding author: Neha Patni, Department of Chemical Engineering, Institute of Technology, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India, e-mail:


Received: 2013-11-19

Accepted: 2014-03-04

Published Online: 2014-04-26

Published in Print: 2014-08-01


Citation Information: Reviews in Chemical Engineering, Volume 30, Issue 4, Pages 421–430, ISSN (Online) 2191-0235, ISSN (Print) 0167-8299, DOI: https://doi.org/10.1515/revce-2013-0039.

Export Citation

©2014 by Walter de Gruyter Berlin/Boston.Get Permission

Citing Articles

Here you can find all Crossref-listed publications in which this article is cited. If you would like to receive automatic email messages as soon as this article is cited in other publications, simply activate the “Citation Alert” on the top of this page.

[1]
M. Jiménez-Rosado, L.S. Zarate-Ramírez, A. Romero, C. Bengoechea, P. Partal, and A. Guerrero
Journal of Cleaner Production, 2019, Volume 239, Page 117994
[2]
Ana Paço, Jéssica Jacinto, João Pinto da Costa, Patrícia S. M. Santos, Rui Vitorino, Armando C. Duarte, and Teresa Rocha-Santos
Critical Reviews in Environmental Science and Technology, 2018, Page 1
[3]
Marta Wesołowska-Trojanowska, Marta Tomczyńska-Mleko, Konrad Terpiłowski, Bartosz Sołowiej, Maciej Nastaj, and Stanisław Mleko
European Food Research and Technology, 2017
[4]
Marta Wesołowska-Trojanowska, Marta Tomczyńska-Mleko, Cezary A. Kwiatkowski, Katsuyoshi Nishinari, Siemowit Muszyński, and Stanisław Mleko
Food Science and Technology Research, 2017, Volume 23, Number 3, Page 411
[5]
Alexander Jones and Suraj Sharma
Journal of Polymers and the Environment, 2016, Volume 24, Number 4, Page 309
[6]
M. Wesołowska-Trojanowska, M. Tomczyńska-Mleko, K. Terpiłowski, M. Kawecka-Radomska, and S. Mleko
Journal of Inorganic and Organometallic Polymers and Materials, 2016, Volume 26, Number 3, Page 555

Comments (0)

Please log in or register to comment.
Log in