Reviews on Advanced Materials Science is a fully peer-reviewed, open access, electronic journal that publishes significant, original and relevant works in the area of theoretical and experimental studies of advanced materials. The journal provides the readers with free, instant, and permanent access to all content worldwide; and the authors with extensive promotion of published articles, long-time preservation, language-correction services, no space constraints and immediate publication.
Reviews on Advanced Materials Science is listed inter alia by Clarivate Analytics (formerly Thomson Reuters) - Current Contents/Physical, Chemical, and Earth Sciences (CC/PC&ES), JCR and SCIE. Our standard policy requires each paper to be reviewed by at least two Referees and the peer-review process is single-blind.
Reviews on Advanced Materials Science publishes research, communications, reviews, Topical Issues, Special Issues, and news covering areas including:
biological and biomedical materials,
metals and physical metallurgy,
ceramics and glasses,
electrical, optical and magnetic materials,
fibers and composite materials,
nanostructured materials and nanocomposites.
Why submit and read
Reviews on Advanced Materials Science is a premier source of a high quality research. All published articles are made freely and permanently accessible online.
Authors benefit from fair and constructive peer review, language-correction services and extensive promotion of each published article.
The journal uses continuous publication model - accepted manuscripts are published quickly after the acceptance.
Authors retain copyright of articles published in the journal, there is no embargo period on self-archiving.
The journal is archived in Portico to ensure long-term monitoring, archiving, and management of the electronic publications stored on its servers.
For the information on Article Processing Charges please go to Supplementary Information section below and view "Article Processing Charges" document (in PDF). Detailed information on Editorial Policy, Publication Ethics, Instructions for Authors etc. can be found below and in the Supplementary Information section.
contain original work - not published elsewhere in any medium (in the whole or in part) by the authors or anyone else and not under consideration for publication in any other medium;
focus on the aims and scope of the journal;
be clearly and correctly written - should contain all essential features of a scientific publication that is easy to understand for the target audience;
written in English - attention to detail of the language will avoid severe misunderstandings which might lead to rejection of the paper;
be delivered in electronic format.
The journal publishes:
Communications and Rapid Communications
Reviews and Mini-Reviews
Letters to the Editor and Amendments
SUBMISSION OF MANUSCRIPTS Manuscripts have to be written in LATEX (preferable), AMS-TEX, AMS-LATEX or MS Word - standard DOCUMENT (.DOC). We do not accept papers in Plain TEX format. If additionally a PDF file is supplied, the peer review process will speed up. Authors are encouraged to submit the final version of the paper using the De Gruyter Open LATEX template. For detailed information, please see Instruction for Authors.
EDITORIAL POLICY The journal uses a closed single-blind peer review system. Unpublished material: Submission of a manuscript implies that the work described is not copyrighted, published or submitted elsewhere, except in abstract form. The corresponding author should ensure that all authors approve the manuscript before its submission. Ethical conduct of research: The authors must describe and confirm safeguards to meet ethical standards when applicable. See Editorial Policy for details. Conflict of interest: When authors submit a manuscript, they are responsible for recognizing and disclosing financial and/or other conflicts of interest that might bias their work and/or could inappropriately influence his/her judgment. If no specified acknowledgment is given, the Editors assume that no conflict of interest exists. Authors are encouraged to fill in the ICMJE Conflicts of Inte est Form (available here ) and send it in the electronic format to the Managing Editor.
Copyright: All authors retain copyright, unless - due to their local circumstances - their work is not copyrighted. The non-commercial use of each article will be governed by the Creative Commons Attribution-NonCommercial-NoDerivs license. The corresponding author grants the journal exclusive license for commercial use of the article, by signing the License to Publish. Open Access License is available on the webpage. We encourage the authors to send the signed license along with the manuscript. Please note, that no article will be published unless the Open Access License is signed.
Authorship: Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
Peer Review process: The Editors reserve the right to decline the submitted manuscript without review, if the studies reported are not sufficiently novel or important to merit publication in the journal. Manuscripts deemed unsuitable (insufficient originality or of limited interest to the target audience) are returned to the author(s) without review. The Editor seeks advice from experts in the appropriate field. Research articles and communications are refereed by a minimum of two reviewers, review papers by at least three. Authors are requested to suggest persons competent to review their manuscript. However, please note that this will be treated only as a suggestion, and the final selection of reviewers is exclusively the Editor's decision. The final decision of acceptance is made by the Managing Editor or, in case of conflict, by the Editor-in-Chief.
Scientific Misconduct: This journal publishes only original manuscripts that are not also published or going to be published elsewhere. Multiple submissions/publications, or redundant publications (re-packaging in different words of data already published by the same authors) will be rejected. If they are detected only after publication, the journal reserves the right to publish a Retraction Note. In each particular case Editors will follow COPE's Code of Conduct and implement its advice
Editors-in-Chief David Hui, Department of Mechanical Engineering, University of New Orleans, USA Eulogio Castro Galiano, Center for Advanced Studies in Energy and Environment, Universidad de Jaén, Spain
Editorial Board Sondipon Adhikari, Chair of Aerospace Engineering, College of Engineering, Swansea University, UK Ron Armstrong, Department of Mechanical Engineering, University of Maryland, USA Maria Laura Di Lorenzo, Institute of Polymers, Composites and Biomaterials (CNR), National Research Council of Italy, Italy Vito Di Noto, Full Professor of Electrochemistry for Energy and Solid-State Chemistry, Head of the Section of Chemistry for Technology in the Department of Industrial Engineering, University of Padova, Italy Claudio Gerbaldi, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy Michele Giordano, Institute of Polymers, Composites and Biomaterials (CNR), National Research Council of Italy, Italy Yury Gogotsi, A. J. Drexel Nanomaterials Institute and Department of Materials Science & Engineering, Drexel University, USA David Hui, Department of Mechanical Engineering, University of New Orleans, USA Terence G. Langdon, Faculty of Engineering and the Environment, University of Southampton, UK Alfonso Maffezzoli, Department of Engineering for Innovation, University of Salento, Italy Giulio Malucelli, Department of Applied Science and Technology and Local INSTM Unit, Politecnico di Torino, Italy Frank Otremba, Division 3.2 Tanks for Dangerous Goods and Accident Mechanics, Federal Institute for Materials Research and Testing (BAM), Germany Hélder Santos, Faculty of Pharmacy, Pharmacy University of Helsinki, Finland Robert D. Shull, National Institute of Standards and Technology, USA Vadim Silberschmidt, Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, UK Alberto Tagliaferro, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Italy George J. Weng, Department of Mechanical & Aerospace Engineering, Rutgers University, USA Yuntian Zhu, School of Materials Science and Engineering, North Carolina State University, USA
Advisory Board Luigi Botta, Department of Engineering, University of Palermo, Italy Yu-Sheng Chen, ChemMatCARS, The University of Chicago, USA Elvira De Giglio, Department of Chemistry, University of Bari Aldo Moro, Italy Andrea Dorigato, Department of Industrial Engineering and INSTM Research Unit, University of Trento, Italy Dinc Erdeniz, Department of Materials Science and Engineering, Northwestern University, USA Giangiacomo Minak, Department of Industrial Engineering, Alma Mater Studiorum Università di Bologna, Italy Tanmoy Mukhopadhyay, Department of Engineering Science, University of Oxford, UK Dolores Eliche Quesada, Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaen José-Antonio Romero-Navarrete, Division 3.2 Tanks for Dangerous Goods and Accident Mechanics, Federal Institute for Materials Research and Testing (BAM), Germany Mohsen Asle Zaeem, Department of Mechanical Engineering & Materials Science Program, Colorado School of Mines, USA
Language Editors Johar M. Ashfaque, University of Liverpool, UK Emmanuel Gonzalez Escobar, Lancaster University, UK
Publisher DE GRUYTER Poland Bogumila Zuga 32A Str. 01-811 Warsaw, Poland T: +48 22 701 50 15