Test Cover Image of:  tm - Technisches Messen
Impact Factor

tm - Technisches Messen

Plattform für Methoden, Systeme und Anwendungen der Messtechnik

Editor In Chief: Thomas Fröhlich and Bernhard Zagar

tm - technisches messen is proud to announce a new feature, the Editor’s Choice free access article. To download the featured article free of charge, please click the link below.

Vol. 86, Supplement 1: XXXIII. Messtechnisches Symposium 2019

Vol. 86, Iss. 5: Fertigungstechnologien für Ultraschallwandler im Frequenzbereich zwischen 40 kHz und 40 MHz by Sylvia E. Gebhardt, Paul A. Günther, Kai Hohlfeld and Holger Neubert

< p>

Vol. 86, Iss. 4: Methods for hyperspectral image processing incorporating adjacency information by Sebastian Bauer and Fernando Puente León

Vol. 85, Supplement 1: XXXII. Messtechnisches Symposium 2018

Vol. 85, Iss. 7-8: User interaction measurements of an exoskeleton using EMG and joint torque by Markus Hessinger, Eike Christmann, Roland Werthschützky and Mario Kupnik

Vol. 85, Iss. 6: Theory and application of a novel co-resonant cantilever sensor by Julia Körner, Christoper F. Reiche, Bernd Büchner and Thomas Mühl

Vol. 85, Iss. 3: Motion-based material characterization in sensor-based sorting by Georg Maier, Florian Pfaff, Florian Becker, Christoph Pieper, Robin Gruna, Benjamin Noack, Harald Kruggel-Emden, Thomas Längle, Uwe D. Hanebeck, Siegmar Wirtz, Viktor Scherer and Jürgen Beyerer

Vol. 85, Iss. 2: Estimated velocity in traffic enforcement: The quality difference between a linear regression line and the line connecting the two end points by Robert Wynands

Vol. 84, Iss. 12: Determining temperature dependent surface tension of the iron-nickel system by means of electromagnetic levitation by Thomas Leitner, Olivia Klemmer and Gernot Pottlacher

Vol. 84, Supplement 1: XXXI. Messtechnisches Symposium 2017

Vol. 84, Iss. 5: Sensors, instrumentation and measurement science for "Industrie 4.0"/ Sensorik und Messtechnik für die Industrie 4.0 by Andreas Schütze and Nikolai Helwig

Vol. 84, Iss. 5: Sensor information as a service – Component of the networked production/ Sensorinformationen als Dienst – Baustein der vernetzten Produktion by Robert H. Schmitt and Christoph Voigtmann

Vol. 84, Iss. 3: Viscoelasticity and anisotropy of polymers: ultrasonic based method for material parameter determination by Fabian Bause, Leander Claes, Manuel Webersen, Sarah Johannesmann and Bern Henning

Vol. 83, Iss. 12: Vergleichsproben aus Silizium für die Flächenrauheit by Joachim Frühauf, Eva Gärtner, Ludger Koenders and Andre Felgner

Vol. 83, Iss. 12: Downstream relaxation of velocity profiles in pipe-flow with swirl disturbances by Simon Graner, Denis F. Hinz and Christian Breitsamter

Vol. 83, Iss. 10: Inline imaging-ellipsometer for printed electronics by Florian Huemer, Murad Jamalieh, Ferndinand Bammer and Dirk Hönig

Vol. 83, Iss. 10: Setup of a large-scale test field for distributed soil gas sensors and testing of a monitoring method based on tomography by Patrick P. Neumann, Klaus-Dieter Werner, Sergej Petrov and Detlef Lazik

Vol. 83, Iss. 9: Creating precise reference data for 3D head pose estimation by Sebastian Vater, Johannes Pallauf, Marian Hoffman, Thorsten Stein and Fernando Puente León

Vol. 83, Iss. 1: Noise equalisation and quasi loss-less image data compression – or how many bits needs an image sensor? by Bernd Jähne and Martin Schwarzbauer

Your benefits

  • Professional journal for application-based industrial measurement as one of the essential components of automation, process monitoring, quality control and safety engineering
  • Official organ of AMA (The Association for Sensor Technology) and NAMUR (The Process-Industry Interest Group for Automation Technology)
  • Includes notifications from GMA (The VDI/VDE Society for Measurement and Automatic Control)
  • Renowned Editorial Board
  • High-quality contributions
  • Special issues
  • Print- and online-publication


The journal promotes dialogue between the developers of application-oriented sensors, measurement systems, and measurement methods and the manufacturers and measurement technologists who use them.


  • The manufacture and characteristics of new sensors for measurement technology in the industrial sector
  • New measurement methods
  • Hardware and software based processing and analysis of measurement signals to obtain measurement values
  • The outcomes of employing new measurement systems and methods

Journal Metrics

5-year Impact Factor
Cite Score
Impact Factor
SCImago Journal Rank
Source Normalized Impact per Paper


tm – technisches messen was founded in 1931.

Abstracting & Indexing

tm - Technisches Messen is covered by the following services:

  • Baidu Scholar
  • Cabells Journalytics
  • Chemical Abstracts Service (CAS) - CAplus
  • Chemical Abstracts Service (CAS) - SciFinder
  • CNKI Scholar (China National Knowledge Infrastructure)
  • CNPIEC - cnpLINKer
  • Dimensions
  • EBSCO (relevant databases)
  • EBSCO Discovery Service
  • Ei Compendex
  • Engineering Village
  • Genamics JournalSeek
  • Google Scholar
  • Inspec
  • Japan Science and Technology Agency (JST)
  • J-Gate
  • Journal Citation Reports/Science Edition
  • JournalGuide
  • JournalTOCs
  • KESLI-NDSL (Korean National Discovery for Science Leaders)
  • Microsoft Academic
  • MyScienceWork
  • Naver Academic
  • Naviga (Softweco)
  • Primo Central (ExLibris)
  • Publons
  • QOAM (Quality Open Access Market)
  • ReadCube
  • Reaxys
  • SCImago (SJR)
  • Semantic Scholar
  • Sherpa/RoMEO
  • Summon (ProQuest)
  • TDNet
  • TEMA Technik und Management
  • Ulrich's Periodicals Directory/ulrichsweb
  • WanFang Data
  • Web of Science - Current Contents/Engineering, Computing, and Technology
  • Web of Science - Science Citation Index Expanded
  • WorldCat (OCLC)
  • Yewno Discover

Article formats

Research articles

Your benefits of publishing with us


You can easily submit your manuscript online. Simply go to...


...and you will be guided through the whole peer-reviewing and publishing process.

Submission process

Please note

We look forward to receiving your manuscript!

Hybrid Open Access

For complete details on hybrid open access publishing at De Gruyter please see: https://www.degruyter.com/page/560

Effective 1st January 2016, authors from an institution affiliated with either the Association of Dutch Universities (VSNU), the Consortium of Swiss Academic Libraries or some UK libraries participating in the Jisc Collections SMP  may publish primary research and review articles open access in any of De Gruyter’s OnlineOpen journals at a discount of 90% of the APC price. For more information and to confirm whether your institution is eligible please see the following:

The Netherlands: https://www.degruyter.com/page/1461
The UK: https://www.degruyter.com/page/1462
Switzerland:  https://www.degruyter.com/page/1463


Prof. Dr. Th. Fröhlich, Ilmenau
Prof. Dr.-Ing. B. Zagar, Linz

Editorial Board

Dr.-Ing. M. Bartholmai, Berlin
Prof. Dr.-Ing. J. Beyerer, Karlsruhe
Prof. Dr.-Ing. J. Czarske, Dresden
Prof. Dr.-Ing. A. Fischer, Bremen
Prof. Dr.-Ing. G. Fischerauer, Bayreuth
Prof. Dr.-Ing. M. Heizmann, Karlsruhe
Dr.-Ing. F. Höller, Scantinel Photonics, Ulm
Dr. B. Jeckelmann, Muntelier
Prof. Dr. R. Z. Morawski, Warschau
Dr. T. Pechstein, Waldheim
Dr. A. Röttger, Braunschweig
PD Dr. S. J. Rupitsch, Erlangen
Prof. Dr. A. Schütze, Saarbrücken
Prof. Dr.-Ing. K.-D. Sommer, Ilmenau
Prof. Dr. A. Sutor, Hall in Tirol
Prof. Dr. R. Tutsch, Braunschweig
Prof. Dr. R. Werthschützky, Darmstadt

Journal Manager

Genthiner Strasse 13
10785 Berlin, Germany
+49 30.260 05-344

From  $149.00
Add to Cart



developers, manufacturers, measurement technologists